Brass Needle Glue Valve for Pillar HPJ, H49
* If you are replacing this part, be sure the regulator for the glue nozzle is set at 12 psi. You should also start with a fresh part #P8010. Especially if the regulator had been set too high.
(should also order part #P8010)
Full assembly with Valve is part J05761
* If you are replacing this part, be sure the regulator for the glue nozzle is set at 12 psi. You should also start with a fresh part #P8010. Especially if the regulator had been set too high.
(should also order part #P8010)
Full assembly with Valve is part J05761