Audatech KAPPA M-RV600 Cut Off Saw

The Kappa is a heavy-duty machine. The solid cast iron base and sturdy construction with its 2,200-lb. guarantee high precision and longevity of the unit throughout years of operation.

The cutting cycle happens with the machine automatically rising the blade at cut commands. The 600mm blade diameter has a maximum projection of 215mm above the working table, allowing the processing of clear cuts on material up to 200mm by 200 mm for 90° straight cuts and cuts up to 150mm on a 45°.

The machine is manually set by the operator that can easily rotate the table in the desired position by releasing the pneumatic lock and reading on the digital display the desired target value.

The tilting of the blade is assisted by pneumatic action with pre-set stops at 90° and 45° for quick setting.  Once the work piece is loaded on the machine and secured in position with the action of the clamps, following the safety standard protocol, the operator activates the cutting cycle by holding down the “Cycle” buttons with both hands. First the safety hood come down and then the blade will rise to complete the cut. Once the blade has returned in the down position, the hood re-opens and the clamps will release the pieces.