Penetration: 50mm effective, curing speed: 3 - 10 seconds per weld.
Generator frequency: Nominal 27.2 Mhz.
Includes -
Timer for adjustable cure length with "elapsed" buzzer,
easily visible power needle,
adjustable power lever of hand gun,
guard for electrodes,
spare set of electrodes,
support for hand gun.
Supply: Single Phase 240 volt / 50hz (standard 13-amp 3-pin plug). Works fine at 60 Hz U.S. power.
Output: 0.5 - 0.6 amps at 2400 volts (internal HT) on load.
Electrical Safety: Cabinet and fittings are fully earthed.
Cutout switch isolates main power if rear access panel is removed.
10 amp panel-mounted fuse for protection.
Hand gun specification: Lightweight, easy to use hand gun. Incorporates on/off trigger,
thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes.
Servicing and maintenance: A comprehensive range of spares are available from Tregarne,
also stocked at Hermance Machine, and can usually be delivered next day. Repairs can be carried out within 1 - 2 days.
Warranty: All new machines are covered by a standard 12-month warranty from the date of purchase.
Generator frequency: Nominal 27.2 Mhz.
Includes -
Timer for adjustable cure length with "elapsed" buzzer,
easily visible power needle,
adjustable power lever of hand gun,
guard for electrodes,
spare set of electrodes,
support for hand gun.
Supply: Single Phase 240 volt / 50hz (standard 13-amp 3-pin plug). Works fine at 60 Hz U.S. power.
Output: 0.5 - 0.6 amps at 2400 volts (internal HT) on load.
Electrical Safety: Cabinet and fittings are fully earthed.
Cutout switch isolates main power if rear access panel is removed.
10 amp panel-mounted fuse for protection.
Hand gun specification: Lightweight, easy to use hand gun. Incorporates on/off trigger,
thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes.
Servicing and maintenance: A comprehensive range of spares are available from Tregarne,
also stocked at Hermance Machine, and can usually be delivered next day. Repairs can be carried out within 1 - 2 days.
Warranty: All new machines are covered by a standard 12-month warranty from the date of purchase.