The J20 Horizontal Boring Machine is equipped with a hydraulically actuated spindle carriage that moves back and forth and a steel table, vertically adjustable up to 2.5 inches.
The spindle carriage slides over two hard chrome-finished guideposts. Drilling depth, up to 6 inches precisely, is set by micro switches, while spindle advance feed speed can be set by flow control valve. For added flexibility in the boring patterns, spindle and/or clusters are belt driven and powered by 1, 1.5 or 2 HP three phase motors 220, 440 or 600 volts / 60 cycles
Belt driven spindles and fixed center clusters, as well as hold downs, are mounted on dovetail beams. Spindles can be moved to the exact position with the help of a scale fastened to the face of the dovetail beam
The J20 is available in 4, 5, 6, 8 and 10 foot widths.
The Basic machine includes: main body, a 12" wide adjustable steel table of lengths specified above, including 3 air operated hold downs with locator stops, electrical control system, hydraulic unit, cycle foot switch, dovetail beam and safety guards
SPECIFICATIONS | 4 foot model |
BORING AREA | 21⁄2” wide X 48” long |
TABLE (steel) | 12” wide X 48” long with 21⁄2” vertical adjustment |
OPERATION | Single stroke | Up to 6” stroke (adjustable) | Hydraulic power unit 3 HP | Variable speed feed |
SPINDLE MOUNT | Spindles and motors are mounted on a table fixed to the main frame by way of 2 hard chrome posts sliding in 2 cast iron horizontal guides |
SPINDLE(S) | Quantity as required | 1 1⁄2” in diameter with spring collet for 1⁄2” shank | Speed 2300 RPM | Timing belt driven | Mounted on a dovetail beam for easy adjustment |
MOTOR(S) | Quantity as required (depends on the size of the machine) | 1 HP, 208/220/440/575 volts, 3 Ph., 60 cycles |
GUARD | Clear plastic guard |
DIMENSIONS | height 54”, width 54”, depth 48” |
WEIGHT | approximate net weight: 2750 lbs. - approximate shipping weight: 3000 lbs. |