Leadermac LMC 330SK Saw Kerf Marking Machine.
Motor and cutterhead assembly "automatically and randomly" oscillates side to side and tilt back 0 - 5 degrees via servo motor
Motor mount dovetail assembly up/down adjustment for thickness by PC control.
Axial adjustment of multiple rip saw spindle via manual adjustment
5.7" touchscreen
Oscillates side to side and tilt back 0 - 5 degrees (and up/down 0-3mm)
Axial adjustment of multiple rip saw spindle(manual adjustment)
Working W idth: 15 - 300mm
Working Thickness: 10 - 150mm
1st Bottom Spindle: 10 HP
Allowable cutting circle: 125 -160mm
2nd Top Spindle: 10 HP
Allowable cutting circle: 112 - 200mm
3rd Multiple rip saw spindle for kerfing unit: 7.5 HP
Allowable cutting circle: 355cm
Feed motor: 7.5 HP / Inverter x 1
1st, 2nd spindle diameter: 2 1/8" (with outboard bearing)
3rd spindle diameter: N/A
1st 2nd spindle RPM: 6,000 RPM
3rd spindle RPM: 2,800 ~ 4,000 RPM
Feed Speed: 6 ~ 40 m/min
Motor and cutterhead assembly "automatically and randomly" oscillates side to side and tilt back 0 - 5 degrees via servo motor
Motor mount dovetail assembly up/down adjustment for thickness by PC control.
Axial adjustment of multiple rip saw spindle via manual adjustment
5.7" touchscreen
Oscillates side to side and tilt back 0 - 5 degrees (and up/down 0-3mm)
Axial adjustment of multiple rip saw spindle(manual adjustment)
Working W idth: 15 - 300mm
Working Thickness: 10 - 150mm
1st Bottom Spindle: 10 HP
Allowable cutting circle: 125 -160mm
2nd Top Spindle: 10 HP
Allowable cutting circle: 112 - 200mm
3rd Multiple rip saw spindle for kerfing unit: 7.5 HP
Allowable cutting circle: 355cm
Feed motor: 7.5 HP / Inverter x 1
1st, 2nd spindle diameter: 2 1/8" (with outboard bearing)
3rd spindle diameter: N/A
1st 2nd spindle RPM: 6,000 RPM
3rd spindle RPM: 2,800 ~ 4,000 RPM
Feed Speed: 6 ~ 40 m/min