FEATURES
Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation)
4 to 6 Heads - 9", 10.2", 12", & 13" Widths
One piece machine frame specially heat treated & stress relieved
1-1/2", 40mm, 1-13/16" or 50mm diameter spindles standard
SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
6000, 7200, or 8000 RPM optional
Each spindle is driven by individual motors
Tables/Fences and Chipbreakers are hard chrome plated
Full Cardan Shaft drive with feed speeds up to 82 FPM
Top rolls variable pneumatic tensioned
Full width bottom driven bedrolls
Pneumatic tension top chipbreakers & roll holdovers - Optional
Easy head adjustment by mechanical digital readouts
Dual Digital Readout available for radial setting (NS & Tops)
REC-705B Quik-TrueSet Setworks optional
Universal head or rip section optional
Safety enclosure serves as chip guard and greatly reduces noise
Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation)
4 to 6 Heads - 9", 10.2", 12", & 13" Widths
One piece machine frame specially heat treated & stress relieved
1-1/2", 40mm, 1-13/16" or 50mm diameter spindles standard
SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
6000, 7200, or 8000 RPM optional
Each spindle is driven by individual motors
Tables/Fences and Chipbreakers are hard chrome plated
Full Cardan Shaft drive with feed speeds up to 82 FPM
Top rolls variable pneumatic tensioned
Full width bottom driven bedrolls
Pneumatic tension top chipbreakers & roll holdovers - Optional
Easy head adjustment by mechanical digital readouts
Dual Digital Readout available for radial setting (NS & Tops)
REC-705B Quik-TrueSet Setworks optional
Universal head or rip section optional
Safety enclosure serves as chip guard and greatly reduces noise
| Working Width (at a tool cutting circle of 125mm) | 15-150mm |
| Working height (at a tool cutting circle of 125mm) | 10-100mm |
| Number of spindles, min-max | 3 |
| Basic motor capacity per spindle | 15HP |
| Basic motor capacity of feed | 3 KW / 5HP |
| Spindle speed | 6000 RPM |
| Spindle diameter | 40mm |
| Tool cutting circle, first bottom spindle, min-max | 125mm |
| Tool cutting circle, horizontal spindles, top, min-max | 125mm |
| Saw blade circle, horizontal spindles, top, min-max | 250mm |
| Tool cutting circle, horizontal spindles, bottom, min-max | 125mm |
| Feed motor | 5HP/inverter |
| Feed speed, infinitely variable by frequency driven motor | 6-30 m/min |
| Feed roller diameter | 89mm |
| Feed roller width | 2 x 50mm |
| Pneumatic pressure for feed rollers, max | 6 bar (87psi) |
| Adjustment range for infeed table and edge-jointing fence | 10mm |