Leadermac Hypermac Moulder

Leadermac Hypermac Moulder

• 1 to 11 Heads


• 9”(230mm), 10.2”(260mm), 12”(305mm), 13”(330mm) or 15.75"(400mm) width


• 1/4"(10mm), 6”(150mm), 8”(205mm) or 10”(255mm) thickness

Moulder Features

• Full enclosure with internal lighting system


• One-piece, cast iron frame is specially heat treated for standard configurations


• Extra heavy feed beam supported at each end of the beam on 2 large supporting columns


• Feed system is chainless full heavy duty with cardan shaft and heavy gearboxes and universals


• Faster feed speeds of up to 120 fpm (40m/min) are standard


• Pneumatic pressure of the top feed rolls can be easily set to provide the best feed roll pressure. Separate Pressure controls for top infeed, midfeed & outfeed rolls


• Pneumatic pressure is easily adjusted to side head holdover rolls as well as the top head chipbreaker(s)


• Precision spindle assemblies each including 4 precision bearings ABEC 7 for highest tolerances


• Spindle speeds are standard 6,000 rpm


• Each spindle is driven by an individual motor for powerful machining and easy control


• REC Setworks: Programmable controller provides convenient thickness & width of cut settings.


• Hard-chrome plating to all table surfaces, chip breakers, pressure plates and main guide for maximum wear resistance


• Dual digital counters and digital readouts for all heads axial and radial as well as counters on chip breakers and pressure plate(s)


• Automatic table lube system included


• Central grease lubrication system: Lubrication points located from front of machine

• Leadermac Hypermac Brochure