OMGA Double Mitre Saw TR 2A 230V 3PH
With the OMGA Double Mitre Saw TR 2A, you can finally get accurate cuts in less time and effort. This double mitre saw comes with two heads - one is fixed while the other is movable. Both of them come with positive mitering stops for precision cutting. An electro-pneumatic system controls this double mitre saw so you can select the best working cycle. There are three cycles that you can choose from. These are single head cycling, alternate cycle and continuous blade cycle. Aside from available work cycles, the OMGA Double Mitre Saw TR 2A is also equipped with two vertical clamps for maximum workpiece stability. To keep this machine continuously working, an overload protection is equipped in each of the two motors.
| Maximum distance between saws | 9' 2" |
| Minimum distance between saws | 8 1/2" |
| Minimum distance between saws 45 degrees | 1 3/16" (+ optional) |
| Cross cut capacity 90 degrees | 5 1/2" |
| Cross cut capacity 45 degrees | 4 5/16" |
| Maximum depth of cut | 3 1/2" |
| Motor power HP | 2 x 3 HP |
| Saw bore | 1" |
| Saw diameter | 12" |
| Arbor speed RPM | 3200 |
| Dust chute | 3 1/8" |
| Crated dimensions | 150” x 39” x 44” |
| Approximate shipping weight | 1,250 lbs. |
| Electrical information | 230 volt, 3 phase |