Powermatic 201 Planer 22" Wide Planer. 7.5HP 1PH 230V
Planning to change your old planer with a more efficient machine that will give you the best performance for years? The Powermatic 201 Planer, 7.5HP 1PH 230V is a must-have planer model from Powermatic. This sander is constructed for demanding jobs. It has a 1,300 lb. built which offers ultimate rigidity and reduced vibration. Its hinged top allow you to easily access the rollers or the knives. A dust port is featured at the hood for dust-free working. Its cutterhead consists of four knives that produces more 19,000 cuts per minute. For a more exceptional finish, you will find a pressure back and anti-kickback fingers near the cuterhead. The Powermatic 201 Planer also features a revolutionary infeed and outfeed rollers with roller bearings. The outfeed roller comes with small serrations for smoother finish and still offer positive feeding. In fact, you can plane multiple boards with its sectional infeed and chop breaker. For rough and finish planing, the adjustable bed roller feature makes it possible. Its two-speed gearbox is also helpful for rough or finish jobs. This strong sander is equipped with 7-1/2 horsepower for continuous planing.
- Solid planer performance with its strong construction
- Rough and fine finish working with its two feed speeds
- Multiple board planing with its segmented infeed roller which also consists of sectional chipbreaker
- Four knife head
- Smooth feeding with adjustable bed rollers
- Wide cast iron table
- Dust port
- Foot pads are adjustable
- Setting gauge for the knife
Style (Type) | Planer |
Cutterhead Speed (RPM) | 4,800 |
Cutterhead Diameter (In.) | 3-1/4 |
Cuts Per Minute | 19,200 |
Number of Knives | 4 |
Maximum Depth of Cut (In.) | 3/16 |
Maximum Planing Width (In.) | 22 |
Maximum Planing Thickness (In.) | 9-1/4 |
Minimum Planing Length (In.) | 10 |
Feed Rate (FPM) | 20, 30 |
Number of Speeds | 2 |
Segmented Infeed Roller Diameter (In.) | 3 |
Outfeed Roller Diameter (In.) | 3 |
Bed Rollers Adjustable from Front | 2 |
Table Size (L x W) (In.) | 32-1/4 x 24 |
Table Support | 2 Column |
Dust Collection Minimum CFM Required (CFM) | 900 |
Dust Port Outside Diameter (In.) | 5 |
Motor Power (HP) | 7-1/2 |
Motor Phase | 1 |
Motor Voltage (V.) | 230 |