An amazingly versatile clamping station for Kreg Joinery and a variety of other wood project tasks
Includes two 3" (76mm) Bench Clamps with auto-adjust technology
Durable melamine surface resists glue and is easy to clean
Two lengths of Clamp Trak allow easy clamp positioning
Five Clamp Blocks make it easy to square up assemblies
Compatible with the Multi-Purpose Shop Stand
The Kreg Clamp Table is the ultimate clamping solution for Kreg Joinery and works with the entire family of Clamp System Components. If you’ve ever struggled to get perfectly flush Kreg Joints, failed to get your clamps positioned exactly where you need them, or needed an extra set of hands around the workshop, the Kreg Clamp Table is your perfect solution.
Note: This is the same table included in the Clamp Table and Steel Stand Combo, but comes without the stand so that you can place it wherever you need it.
Auto-Adjust Technology
Thanks to Automaxx® Auto-Adjust Technology, included Bench Clamps adjust to match material thickness automatically with a simple squeeze of handles—whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.
Durable Work Surface
Made from glue-resistant melamine, this large 213/4" x 333/4" work surface is perfect for sanding, sawing, drilling, routing, joining, and almost any other woodworking task.
Flexible Positioning
Stop working around your clamps and start working with them. The Clamp Trak allows you to position your Kreg Bench Clamps and Clamp Blocks anywhere along the table’s edge and quickly remove them to regain your flush work surface.
Precise Alignment
Made from durable, impact-resistant plastic, Kreg Clamp Blocks can be positioned anywhere along the Clamp Trak, allowing you to quickly register your workpieces and align your project.
Versatile Clamping
The Kreg Bench Clamp is great for almost any woodworking task. It slides across the Clamp Trak, rotates 360 degrees, and locks firmly into place wherever you need it most.
Includes two 3" (76mm) Bench Clamps with auto-adjust technology
Durable melamine surface resists glue and is easy to clean
Two lengths of Clamp Trak allow easy clamp positioning
Five Clamp Blocks make it easy to square up assemblies
Compatible with the Multi-Purpose Shop Stand
The Kreg Clamp Table is the ultimate clamping solution for Kreg Joinery and works with the entire family of Clamp System Components. If you’ve ever struggled to get perfectly flush Kreg Joints, failed to get your clamps positioned exactly where you need them, or needed an extra set of hands around the workshop, the Kreg Clamp Table is your perfect solution.
Note: This is the same table included in the Clamp Table and Steel Stand Combo, but comes without the stand so that you can place it wherever you need it.
Auto-Adjust Technology
Thanks to Automaxx® Auto-Adjust Technology, included Bench Clamps adjust to match material thickness automatically with a simple squeeze of handles—whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.
Durable Work Surface
Made from glue-resistant melamine, this large 213/4" x 333/4" work surface is perfect for sanding, sawing, drilling, routing, joining, and almost any other woodworking task.
Flexible Positioning
Stop working around your clamps and start working with them. The Clamp Trak allows you to position your Kreg Bench Clamps and Clamp Blocks anywhere along the table’s edge and quickly remove them to regain your flush work surface.
Precise Alignment
Made from durable, impact-resistant plastic, Kreg Clamp Blocks can be positioned anywhere along the Clamp Trak, allowing you to quickly register your workpieces and align your project.
Versatile Clamping
The Kreg Bench Clamp is great for almost any woodworking task. It slides across the Clamp Trak, rotates 360 degrees, and locks firmly into place wherever you need it most.