6 Head 12" Jointed Machine - with profile and straight jonters - feed speeds to 300 fpm.
1 to 11 heads & optional Universal head or Rip Attachment
9", 10.2", 12", 13" or 15" Width; 6", 8" or 10" Thickness Capacity
Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
Full Sound & Safety Enclosure
One-piece, Cast Iron Machine Frame is heat treated for ma. stability & rigidity for std. configurations
Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
H.D. Infeed System with 8" (200mm) Dia. Top Rolls
Sectional Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressures
Pneumatic Pressure to Side head Holdover Rolls as well as the Top Head Chipbreaker(s) + Side head Chipbreaker(s)
Super Precision Spindle Assemblies ea. incl. multiple Super-Precision + outboard Bearings for highest available runout tolerances - hence better finish
Spindles Speeds are Std. 6,000 RPM and 7,200/8,000RPM are optional
Hydro-Loc Outboards for Horizontal Spindle Support
Each spindle is belt driven by an individual HD Motor
REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Bottom Rolls then most of our competition. (See Optional SmarSet Controls listed below and (See Optional SmarSet Controls listed below and in Separate Section)
More Powered Top & Full Width Bottom Rolls then most of our competition
Exclusive, separate adjustment of the Vertical(Side Head) spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability
Extra Heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Main Guide for max. wear resistance
Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
Automatic Pneumatic HD Large Tank Capacity Table Lube System included
Central Easy Access Grease Lubrication systems
Stand alone Operators Console
Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 or415/3/50 if required
AVAILABLE OPTIONS:
Special machine & Head Layout & opposite Handed Configurations available on Request
Feed Speeds to 300FPM(90m/min) or 400FPM(120m/min)
SmartSet 100 - Operator Touch Screen Controls with 250Set Memory to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position also including Quick Open Reset.
SmartSet-300 Touch Screen Moulder Control System – 1,000Set Memory - Maintain all history files, downloads info to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. also including Quick Open Reset.
Precision Auto Straight &/or Profile Jointers
Tilting Chip Breakers, Pressure Plates and/or Feed Beam
Angling Side Head Spindle(s)
Grooved Beds for very short stock Feeding
Universal Head or Rip Attachment is optional
Remote Hand held Pendant control
STANDARD SPECIFICATIONS:
Working Width 0.78"/9", 10.2", 12", 13" or 15"
(20-230mm, 260mm, 305mm, 330mm or 380mm)
Working Thickness .39"-6", 8" or 10"
(10-150mm, 200mm or 250mm)
Number of Spindles 1-11
Motor capacity per spindle 15HP to 60HP
Feed motor (VFD Controlled) 15HP to 30HP
Spindle Speed 6000, 7200 or 8000 RPM
Spindle diameter 1-13/16", 2-1/8", 40mm or 50mm
Feed speed, infinitely variable to 300FPM(90mpm) is optional
Length of the Infeed table 32"(.8m), 55"(1.4m), 78.7"(2m); 98"(2.5m) or 120"(3m)
1 to 11 heads & optional Universal head or Rip Attachment
9", 10.2", 12", 13" or 15" Width; 6", 8" or 10" Thickness Capacity
Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
Full Sound & Safety Enclosure
One-piece, Cast Iron Machine Frame is heat treated for ma. stability & rigidity for std. configurations
Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
H.D. Infeed System with 8" (200mm) Dia. Top Rolls
Sectional Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressures
Pneumatic Pressure to Side head Holdover Rolls as well as the Top Head Chipbreaker(s) + Side head Chipbreaker(s)
Super Precision Spindle Assemblies ea. incl. multiple Super-Precision + outboard Bearings for highest available runout tolerances - hence better finish
Spindles Speeds are Std. 6,000 RPM and 7,200/8,000RPM are optional
Hydro-Loc Outboards for Horizontal Spindle Support
Each spindle is belt driven by an individual HD Motor
REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Bottom Rolls then most of our competition. (See Optional SmarSet Controls listed below and (See Optional SmarSet Controls listed below and in Separate Section)
More Powered Top & Full Width Bottom Rolls then most of our competition
Exclusive, separate adjustment of the Vertical(Side Head) spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability
Extra Heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Main Guide for max. wear resistance
Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
Automatic Pneumatic HD Large Tank Capacity Table Lube System included
Central Easy Access Grease Lubrication systems
Stand alone Operators Console
Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 or415/3/50 if required
AVAILABLE OPTIONS:
Special machine & Head Layout & opposite Handed Configurations available on Request
Feed Speeds to 300FPM(90m/min) or 400FPM(120m/min)
SmartSet 100 - Operator Touch Screen Controls with 250Set Memory to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position also including Quick Open Reset.
SmartSet-300 Touch Screen Moulder Control System – 1,000Set Memory - Maintain all history files, downloads info to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. also including Quick Open Reset.
Precision Auto Straight &/or Profile Jointers
Tilting Chip Breakers, Pressure Plates and/or Feed Beam
Angling Side Head Spindle(s)
Grooved Beds for very short stock Feeding
Universal Head or Rip Attachment is optional
Remote Hand held Pendant control
STANDARD SPECIFICATIONS:
Working Width 0.78"/9", 10.2", 12", 13" or 15"
(20-230mm, 260mm, 305mm, 330mm or 380mm)
Working Thickness .39"-6", 8" or 10"
(10-150mm, 200mm or 250mm)
Number of Spindles 1-11
Motor capacity per spindle 15HP to 60HP
Feed motor (VFD Controlled) 15HP to 30HP
Spindle Speed 6000, 7200 or 8000 RPM
Spindle diameter 1-13/16", 2-1/8", 40mm or 50mm
Feed speed, infinitely variable to 300FPM(90mpm) is optional
Length of the Infeed table 32"(.8m), 55"(1.4m), 78.7"(2m); 98"(2.5m) or 120"(3m)