Aetna Group's RoboPac Robot-2002

Self-propelled robot capable of wrapping, in less than one minute, loads of any size and weight with stretch film. Battery powered at 24 Volts.
Built-in battery charger.
Working capacity: over 200 pallets.
Practical and easy to use further to being sturdy and safe.

Cycles Selectable from Control Panel Full wrapping cycle: upward/downward Individual cycle: only upward and/or only downward Top sheet cycle Rienforcing wraps cycle Operating cycle with preset height from ground level Photocell exclusion cycle (height sensing by altimeter) 4 wrapping cycles can be memorized by adaquately combining the different parameters

Parameters Adjustable from Control Panel Bottom wraps of the pallet Top wraps of the pallet Rotating speed Spool carriage upward speed Spool carriage downward speed Film pre-stretch ratio Film deposit force onto the load Photocell sensing delay Height of rienforcing rounds from ground level Height from ground level of operating cycle star

Functions Available on Control Panel Synoptic display for faults warning Film breakage and spool end warning Keyboard blockage Data imput Buttons +/-

Options and Load Dimensions Automatic cut Mast with working height h.2400 mm (94")H=2.800 mm. (110") Double guiding unit with opposed wheels Guiding unit with 390 mm. diameter wheel Remote control to adjust some work parameters even when machine is in operation. Load dimension: Min. width: 600 mm. (24") Max. width: any Min. length: 600 mm. (24") Max. length: any Standard height: 2200 mm. (86")