Panel Tech (P Series)

The Panel Tech was designed and built to be a lower cost alternative to our most popular Panel Pro Series by trimming some of the extras, without many of the compromises of entry level machines. The Panel Tech uses a large, thick walled, tubular steel bridge. It also employs the same dual direct drive, dual support, closed frame and moving gantry design as our Panel Pro.

Panel Pro (G-Series)

On this Moving Gantry Machine, the table stays fixed while the bridge moves over its surface. This design saves valuable floor space and allows for useful options (such as tool changers and multi-spindle drilling heads). When designed and built correctly, the Panel Pro can easily break down full sheets of 1-1/2" thick plywood, laminates, or veneers at super fast speed rates, under continuous duty conditions and handle solid wood applications on a limited basis.

Super Duty (C Series)

At Onsrud, "Fixed Bridge" means cast iron, which has a better ability to absorb and dampen cutting vibrations. It also means the spindle travels the stationary bridge along the width of the tables while the tables pass underneath the bridge along their short dimension. This design only uses half of the floor space that a typical "Tubular Fixed Gantry" design would use.

Extreme Duty (HD-Series)

The Onsrud Extreme Duty Series CNC Router is designed and built to be the heaviest, fastest, and highest performing machine available in the world at any price. The "oversized" cast iron frame is mated to our one-piece, self-supportive, heat-treated, stress-relieved and normalized, internally reinforced, thick-walled, tubular steel base for unrivaled weight, mass, rigidity, durability, feeds, and speeds.

5-Axis Panel Pro (F-Type, G-Series)

All C.R. Onsrud 5-axis machines have large vertical rams and "oversized" servos for fast positioning and smooth cutting. This design is faster, smoother, and far more rigid than our competitor's comparable machines.

5-Axis Extreme Duty ( F-Type, HD-Series)

All C.R. Onsrud 5-axis machines have large vertical rams and "oversized" servos for fast positioning and smooth cutting. This design is faster, smoother, and far more rigid than our competitor's comparable machines.

500 SS Intermediate Duty/Light Production

The Onsrud model 500SS is capable of plunge routing and profiling both inside cuts in hardwoods, softwoods, man-made woods, non-ferrous metals, aluminum, and a variety of plastics and composites. The 500 SS is generally best utilized in intermittent duty/light production duty.

750 SS Medium to Light-Heavy Duty

The Onsrud model 750 SS is a production duty router that can be used, when properly maintained, for up to 3 shifts per day. It is capable of plunge routing and profiling both inside and outside cuts in hardwoods, softwoods, man-made woods, non-ferrous metals, aluminum, and a variety of plastics and composites. The 750 SS is best utilized in medium to light heavy duty routing applications.

900 VS & 900 VSX Heavy/Severe Duty

The models 900 VS and 900 VSX are Onsrud's finest Inverted Routers, ruggedly built for continuous production duty under sever conditions for up to three shifts per day. Both are capable of plunge routing and profiling both inside and outside cuts in hardwoods, softwoods, man-made woods, non-ferrous metals, aluminum, and a variety of plastics and composites.