DOUCET
Features:
- Central Feed Conveyor for Planks 8 to 16 Feet Long by 12 Inches Wide and 2 Inches Thick
- Machining Stations on Opposite Sides of the Central Feed Conveyor
- Horizontal to Vertical Turner
- Two 45° Corner Bevel Saw Stations
- Two Multiple Spindle Boring Centers, Capable of Simultaneously Drilling Six Holes 12 Inches Deep by 0.25 Inch Diameter
- Two Rod Inserting Stations Capable of Simultaneously Inserting Six Rods in the Pre-Drilled Holes
- Vertical to Horizontal Turner
Engineered Timber Production Lines - End-Finishing System
| For Edge Laminated / Fingerjointed Scaffolding Planks |
Features:
- Central Feed Conveyor for Planks 8 to 16 Feet Long by 12 Inches Wide and 2 Inches Thick
- Machining Stations on Opposite Sides of the Central Feed Conveyor
- Horizontal to Vertical Turner
- Two 45° Corner Bevel Saw Stations
- Two Multiple Spindle Boring Centers, Capable of Simultaneously Drilling Six Holes 12 Inches Deep by 0.25 Inch Diameter
- Two Rod Inserting Stations Capable of Simultaneously Inserting Six Rods in the Pre-Drilled Holes
- Vertical to Horizontal Turner
ALL THESE SIMULTANEOUS OPERATIONS RESULT IN AN EXTREMELY PRODUCTIVE FINISHING SYSTEM, PRODUCING UP TO 720 PIECES PER HOUR, WITHOUT ANY MANUAL INTERVENTION.
