A-700
Built for heavy-duty drilling, the AIRBOR 700 is a sturdy, yet budget-priced Multiple Spindle Vertical Boring Machine.
Material feed is controlled by an air logic system and feed speed is adjustable. Mechanical stops guarantee consistency of drilling depth within a few thousands of an inch. Spindle arms can be positioned in any direction, thus using the entire table surface.
The AIRBOR 700 is available in 3, 4 and 6 foot frames.
A-735
The sturdy and compact AIRBOR 735 is a budget-priced Vertical / Horizontal Boring Machine performing with high precision and accuracy.
Operated by an air-oil system, the AIRBOR 735 is equipped with air hold downs and adjustable front stops that firmly secure parts to the table. It can be used either in vertical or horizontal mode or in combined horizontal / vertical modes.
The AIRBOR 735 is available in 3, 4 and 6 foot frames.
A-750
Built around a steel table with 2.5" vertical adjustment, the AIRBOR 750 is a sturdy, yet budget-priced Multiple Spindle Horizontal Boring Machine.
The spindles are mounted on a dovetail beam that features variable speed feed and adjustable stroke up to 6". The spindle feed is operated by an air-oil system that is controlled by an air-logic system.
The AIRBOR 750 is available in 3, 4 and 6 foot frames.
T-1000
|
Airbor T-1000 standard features include a 12” x 16” hardwood table, spring loaded hold downs, a 2 spindle carriage with 6” vertical stroke, a 1 HP drive group, air/oil feed, air operated controls, foot switch. Standard spindles are 11⁄2” in diameter with 1⁄2” spring collets. |
| Specifications | |
| Capacity, Per Drive Group | Capable of boring 2 holes, 1-1/4" dia. per 1 HP motor |
| Hardwood Table | 12" x 16" |
| Boring Centers | 1-1/2" to 12" |
| Boring Heads | 6" stroke (adjustable) |
| Single stroke | |
| Air/oil, variable feed | |
| Spindle Carriage | 2 spindles |
| 1-1/2" in diameter with spring collet for 1/2" shank | |
| Speed 2300 RPM | |
| Belt driven | |
| Drive Group | 1HP, 208/220/440/575 volts, 3PH, 60 cycles |
| Hold Down | Spring loaded hold down |
| Dimensions | Height 85", Width 22", Depth 38" |
| Weight | Approx. Net Weight: 600 lbs |
| Approx. Shipping Weight: 650 lbs. | |
| Options | |
| Spindle | 2" dia. with spring collet for 1/2" shank |
| 1-1/2" or 2" dia. with Jacobs chuck 1/2" capacity | |
| 1-1/2" or 2" dia. with set screw for 1/2" shank | |
| 1-1/2" or 2" dia. for 7/16" x 14 threaded shank | |
| Motor | 1.5HP or 2HP, 208/220/440/575V, 3PH, 60 cycles |
| 110/220 volts single phase | |
| Idler | Pulley |
| Cluster | 32mm center in line |
T-1050
Airbor T-1050 standard features include a 12” x 16” hardwood table, a two spindle carriage with 4” horizontal stroke, two adjustable 3” diameter air-operated hold-downs, one idler pulley, a 1 HP drive group, air/oil feed, air operated controls, foot switch and safety guard. Standard spindles are 11⁄2” in diameter with 1⁄2” spring collets.
| Specifications | |
| Capacity, Per Drive Group | Capable of boring 2 holes, 1-1/4" dia. per 1 HP motor |
| Hardwood Table | 12" x 16" |
| Boring Centers | 1-1/2" to 12" |
| Boring Heads | 4" stroke (adjustable) |
| Single stroke | |
| Air/oil, variable feed | |
| Spindle Carriage | 2 spindles |
| 1-1/2" in diameter with spring collet for 1/2" shank | |
| Speed 2300 RPM | |
| Belt driven | |
| Drive Group | 1HP, 208/220/440/575 volts, 3PH, 60 cycles |
| Hold Down | 2 air-operated hold downs 3" in dia. with adjustable pressure |
| Air Requirements | 80 PSI, 1/4" inlet |
| Guard | Metal safety guard around spindle carriage |
| Dimensions | Height 85", Width 22", Depth 38" |
| Weight | Approx. Net Weight: 600 lbs |
| Approx. Shipping Weight: 650 lbs. | |
| Table Adjustment | 21/" vertical |
| Options | |
| Spindle | 2" dia. with spring collet for 1/2" shank |
| 1-1/2" or 2" dia. with Jacobs chuck 1/2" capacity | |
| 1-1/2" or 2" dia. with set screw for 1/2" shank | |
| 1-1/2" or 2" dia. for 7/16" x 14 threaded shank | |
| Motor | 1.5HP or 2HP, 208/220/440/575V, 3PH, 60 cycles |
| 110/220 volts single phase | |
| Cluster | 32mm center in line |
