J-3H
|
J-20
The J-20 Horizontal Boring Machine is equipped with a steel table, vertically adjustable up to 2.5 inches and a hydraulically actuated spindle carriage that moves back and forth.
The spindle carriage slides over two hard chrome-finished guideposts. Drilling depth, up to 6 inches precisely, is set by micro switches, while spindle advance feed speed can be set by flow control valve. For added flexibility in the boring patterns, spindle and/or clusters are belt driven and powered by 1, 1.5 or 2 HP three phase motors 220, 440 or 600 volts / 60 cycles.
Belt driven spindles and fixed center clusters, as well as hold downs, are mounted on dovetail beams. Spindles can be moved to the exact position with the help of a scale fastened to the face of the dovetail beam.
The J-20 is available in 4, 5, 6, 8 and 10 foot widths.
J-30
The J-30 Vertical Boring Machine is equipped with a fixed wooden table. On the J-30, vertical boring heads with spindles move up and down. Since its table is fixed, the machine can be equipped with an automatic feeding device.
As an option, the J-30 can be equipped with
individual boring units mounted at one end of the table.
Vertical spindles and hold downs can be mounted on individual
arms, on a dovetail beam or a combination thereof. The boring
depth and feed speed of the spindle carriage are widely
adjustable.
For added flexibility in the boring patterns, spindles and/or
clusters are belt driven and powered by 1, 1.5 or 2 HP three
phase motors 220, 440 or 600 volts / 60 cycles.
The J-30 is available in 4, 5, 6, 8 and 10 foot widths.
J-40
The J-40 Combined Vertical and Horizontal Boring Machine is equipped with a fixed but adjustable table. For vertical boring, heads with spindles move up and down, while for horizontal boring the spindle carriage moves back and forth.
Since the table is fixed, vertical and
horizontal boring can be done alternatively or simultaneously
and/or the machine can be equipped with an automatic feeding
device. Also, either the horizontal or vertical boring can be
programmed to remain idle.
Vertical spindles and hold downs can be mounted on individual
arms, on a dovetail beam or a combination thereof while
horizontal spindles and hold downs are mounted on dovetail
beams. The boring depth and feed speed of the spindle carriage
are widely adjustable. For added flexibility in the boring
patterns, spindles and/or clusters are belt driven and powered
by 1, 1.5 or 2 HP three phase motors 220, 440 or 600 volts / 60
cycles.
As an option, the J-40 can be equipped with individual boring
units mounted at one end of the table.
The J-40 is available in 4, 5, 6, 8 and 10 foot widths.
J-60
|
The J-60 is an extremely versatile yet simple to operate boring machine designed to provide precision boring and/or machining at ends of panels or boards. This machine is equipped with two heads moving back and forth hydraulically (4 inch stroke). It can produce a great variety of patterns with unmatched speed and accuracy. The position of each head as well as the stroke and feed speed are easily adjusted. |
the J-60 can be ordered with any
or all of the following features:
• Vertical clamp
• Swivel plate
• Centering cone
• Auto-feed
• Trim saws
