Festool FS/2 Guide Rail System

The guide rail and the Festool brand go hand-in-hand. After all, who else besides the inventor can look fondly back over 40 years of experience? Festool applies a wealth of experience in producing guide systems and accessories for the most demanding applications, continuously striving to achieve perfect working results more quickly, easily, and efficiently.

Festool FS Guide rails are available in eight different lengths from 3232" to 16.5' (800 - 5000 mm), providing the right rail for every application. Simply lay the guide rail on the workpiece and align the splinterguard flush with the scribe line. Now, place your Festool plunge cut saw on the guide rail. The guide rib on the rail engages the guide slot on the tool, ensuring precision cutting every time. You save time and money by eliminating laborious measurements, rework and wasted material.

Buy now!     •     View Accessories     •     View Specs

• Zero clearance guide rail ensures that the cut mark matches the cut-line.
• Quick set-up with non-slipping bottom strips.
• Repeat cuts with limit stops— just set it and forget it.

• Effortless guidance of plunge saws or routers.
• System integration—same rail for saw, router, or jigsaw.
• Clamping with bottom t-slot— keeps clamps out of the way.

• Glide strips reduce surface friction with the saw base plate.
• Portable, lightweight, and precise.
• Connectors allow you to create custom lengths.

• Serves as cut line and prevents tear-out and splintering of the cut, for perfect cut results.

• Reduces friction between the tool and the guide rail for easier, more fluid cutting action.

• Though originally designed for use with Festool plunge cut saws, guide rails are a perfect match for routers and jigsaws.

• Create custom lengths, with easy assembly and transport.

• Dual clamping strips on the bottom prevent movement during the cutting operation—less set-up time and better results.

• Extruded aluminum profile is robust and lightweight.

• From 3232" (800mm) to 16.5' (5000mm)—a guide rail for every application.

• The guide rail has a t-slot on the bottom for clamping underneath.

• Provides front and rear stop position for accurate and repeatable results.

Guide rails in eight lengths.

Festool ensures a proper length for every application by offering eight lengths of guide rails. Special connectors allow you to mix and match sizes and types to create the exact configuration for your application.

Making precision cuts with a saw or creating straight grooves and dados with a router has never been easier. Taking the tool to the material instead of the material to the tool is the best way to save time, energy, and money. With Festool guide rail systems, you do not need to use an expensive panel saw or worry about pushing a heavy piece of material through a table saw or across a router table. Getting splinter-free cuts, and perfect edges is as simple as laying the guide rail on the workpiece, aligning it to your cut-line, and pushing the tool effortlessly across the rail.

Aspecial non-slip strip helps to prevent guide rail movement as well as protect the workpiece surface. Two continuous t-slots serve as channels that allow clamp and limit stop connection at any point. These same t-slots serve as connection points when joining two rails together. Or attach Festool’s Gecko suction cup clamp for secure alignment on non-porous materials.

1+2 Year Warranty

Festool offers a 3-year warranty, one of the longest in the industry. This warranty is valid on the pre-condition that the tool is used and operated in compliance with the Festool operating instructions. Festool warrants that the specified tool will be free from defects in materials and workmanship for a term of 3 years from the date of purchase.