Dovetail Jointing Systems

PU2: Single-head Routing Machine

The Hoffmann PU2 dovetail routing machine is a free standing production unit. This model is equipped with a high-speed router motor, located at the center of the machine. The supplied 45 degree fence plate, which is guided in a keyway in the machine table, is used to accurately position the material on the table. The location of the dovetail slots for the Hoffmann Keys is adjusted by simply moving this fence plate.

The machine is equipped with a pneumatic foot pedal to start the routing process. Actuating the pedal initiates the routing sequence:

• Pneumatic clamps secures work pieces on machine table
• Router heads advance until the pre-set height position is reached
• Router heads return to base position
• Pneumatic clamps releases work piece

Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed.

A heavy-duty cast aluminum table provides a large work surface, the steel cabinet has a 4" diameter dust collection port on its backside for dust free operation.

The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router, bit change in only minutes. Diamond tooling is also available.

Standard Features:

Hoffmann Dovetail Routing Machine, model PU2, ready for operation, with W-2 carbide router bit installed, with standard 45 degree fence plate and square stop,with air regulator, filter, lubricator assembly installed including toolkit and manual.