OMGA Double Mitre Chop - TR 2A NC
This 12" Double Mitre Saw is equipped with one fixed and
movable head, each having positive mitering stops at +45,-45 and
90 degrees. The machine is controlled by an electro-pneumatic
system which enables the operator to select between three
automatic working cycles: 1) Simultaneous cycling of both
blades, 2)Alternate cycle allowing the machine to cut very short
pieces at 45 degrees, 3) Single head cycling. The two standard
pneumatic vertical clamps ensure the perfect stability of the
work piece. The unit also comes with standard overload
protection on each of the two main motors. A wide variety of
optional equipment is available for this system, such as
additional vertical or horizontal pneumatic clamps, extended
cutting length, brackets for short pieces, air over oil descent
of the heads and spray mist system. The versatility of this unit
makes it the perfect choice for any precision mitering
application.
Buy Now
Machine Specifications:
| Max. distance between saws: 9' 2" |
| Min. distance between saws: 8-1/2" |
| Min. distance between saws 45 Deg.: 1-3/16" (+ optional) |
| Cross cut capacity 90 Deg.: 5-1/2" |
| Cross cut capacity 45 Deg.: 4-5/16" |
| Max. Depth of Cut: 3-1/2" |
| Motor Power HP: 2 x 2.2 HP |
| Max. Beveled Cross Cut: N/A |
| Saw Bore: 1" |
| Saw Diameter: 14" (or 370mm) |
| Arbor Speed RPM: 3200 |
| Dust Chute: 3-1/8" |
| Crated Dimensions: 150" x 39" x 44" |
| Approx. Shipping Weight Lbs.: 1,250 |
Additional Photos:
 |
||
| Details of Onboard Computer |
Optional Equipment Available:
Increased Motors to 3 HP (TR 2A)
Increased Cutting Length to 11'4"
Increased Cutting Length to 14'7"
Increased Cutting Length to 18'
Front Pneumatic Clamp
Brackets for Short Pieces
Spray Mist System
