OMGA Double Mitre Chop - TR 2B VIS
This 14" Double Mitre Saw is equipped with two heads one
fixed on the left and one movable on the right, each having
positive mitering stops at +45,-45 and 90 degrees. The machine
is controlled by an electro-pneumatic system which enables the
operator to select between three automatic working cycles: 1)
Simultaneous cycling of both blades, 2)Alternate cycle allowing
the machine to cut very short pieces at 45 degrees, 3) Single
head cycling. The two standard pneumatic vertical clamps ensure
the perfect stability of the workpiece. The unit also comes with
standard overload protection on each of the two main motors. A
wide variety of optional equipment is available for this system,
such as additional vertical or horizontal pneumatic clamps,
extended cutting length, brackets for short pieces, air over oil
descent of the heads and spray mist system. The versatility of
this unit makes it the perfect choice for any precision mitering
application.
Buy Now
Machine Specifications:
| Max. distance between saws: 9' 2" |
| Min. distance between saws: 12-1/2" |
| Min. distance between saws 45 Deg.: 8-3/4" (+ optional) |
| Cross cut capacity 90 Deg.: 6-1/2" |
| Cross cut capacity 45 Deg.: 5-1/2" |
| Max. Depth of Cut: 4-1/4" |
| Motor Power HP: 2 x 3 HP |
| Max. Beveled Cross Cut: N/A |
| Saw Bore: 1" |
| Saw Diameter: 14" (or 370mm) |
| Arbor Speed RPM: 3200 |
| Dust Chute: 3-1/8" |
| Crated Dimensions: 152" x 39" x 53" |
| Approx. Shipping Weight Lbs.: 1,485 |
 |
||
| Details of Onboard Read Out |
Optional Equipment Available:
Increased Motors to 4HP (TR 2B - TR 2B I)
Increased Cutting Length to 11'4"
Increased Cutting Length to 14'7"
Increased Cutting Length to 18'
Front Pneumatic Clamp
Brackets for Short Pieces
Spray Mist System
