OMGA Finger Jointing Lines - FJL 180 SA

The FJL 180 SA is the Semi-automatic line for finger jointing. The fully automated shaper and the rotating conveyor table (2) provide automatic shaping on the two ends of the pieces as well as the application of the glue. Blanks are then automatically transferred onto the staging roller-table (3). The operator takes the pieces from the roller-way and inserts them in the press channel with the aid of a motorized belt and a power roller (4) . When the limit switch is reached the composed board is cut to length (5) and hydraulically pressed (6). The cross traverse movement of the press table allows to eject the assembled length, thus freeing the channel for the composition of the next board. The FJL 180 SA typically requires two operators.

Machine Specifications:

Max. piece thickness: 3-1/8"

Max. piece width: 6"

Max. piece length: 47"

Min. piece length: 6"

Max. pressing length: 10' - 14' - 20'

Cope spindle motor power: 15HP

Hogging saw motor power: 5HP

Scoring saw motor power: 1HP

Hydraulic press: 26,000 lbs.

Max. production rate batch/min.: 2

Max. production rate pcs./min.: N/A

Production rate FPM (input pieces of 3 1/2"x1 1/2"x14") : 22 FPM

 

Additional Machine Photos:

Units	Press Transfer	Working Cycle