OMGA Radial Arm Saws - RM Series

 

Twin-head radial saws mounted on movable carriages to vary the length of the cut between blades. Due to the specific characteristics of the radial heads, the RM Series is particularly suitable for cutting and squaring panels, for cutting with the blades at 90 or tilted on both axes, vertical and horizontal, including compound angles. The traverse of the moveable head, is manual and is effected by means of hand wheel, the cutting measurement can be read on rulers. As an option it is possible to fit a digital read-out or a computerized NC positioner (shown above). The feed of the saw carriage is oil-pneumatic with the relative controls both of speed and of stroke. The machine is equipped with tow adjustable pneumatic clamps to be set as close as possible to the blade during cutting.

 

Machine Specifications:

Model	RM 800/4
Max. distance between saws	13' 1"
Min. distance between saws	14-1/2"
Max. depth of cut	3-1/2"
Motor power HP	2 x 5 HP
Saw bore	1"
Saw diameter	14"
Arbor speed RPM	3200
Created dimensions	153" x 80" x 45"
Approx. shipping weight lbs.	3,520

 

Additional Machine Photos:

Optional NC Positioner	Optional Digital Read-Out