Model 11

 

Utilizing many features of the larger 14-series:

• A heavy-duty machine frame guarantees stablility and durability
• Advanced engineering design combined with easy-to-use, user-friendly diagnostic software to ensure trouble-free operation
• High-capacity feed drive system for fast acceleration
• Large diameter bottom feed rollers for a reliable and smooth transport of lumber
• Large diameter top feed rollers to handle thickness variations in the lumber
• Overdimensioned bearings for long service life
• Sound enclosed design for noise reduction
• Industrial modular electronic components developed in-house
• High-grade components from reknowned suppliers (Bosch pneumatics, Siemens  and   Indramat AC drives)
  

 

Additional features on the model 11:

• Lumber infeed by a durable timing belt
• Increased feed speed providing high output
• Developed for smaller cross sections (i.e. rip-first application)

 

Yield Optimization:

• Partial optimization
• Full optimization for 8 lumber grades and 8 finger joint grades
• Optimization with priorities
• Quality optimization for minimum waste or with priorities
• Value optimization across grade lines
• Price optimization

 

The control center of the CNC cross cut system is the MAXI 5 Premium CNC Control:

• Industrial PC with micro-processor
• High resolution 15" color touch-screen
• Easy-to-understand error messages
• Auto-priority function
• Quality optimization
• 16 statistics with matrix allocation program
• Graphic display buffer showing previously processed boards on the monitor
• Self-check covering all machine functions
• Network connection to users computer network
• Modem included for remote diagnostics and software upgrades

Options:

• Connection of several CNC Cross cut saws by computer network Max - I-Net
• Terminal software

 

Model 11 E

For automatic cross-cutting according to a cutting list without defect removal
Model 11 E automatically cuts the lumber according to a preset cutting list. Normally it will cut the longest possible preset length that can be taken between the beginning and end of the lumber. Any remaining piece left over will be cut into the next possible longest length…etc. up to the end of the board (= partial optimization). Defects are not considered.
Model 11 is preferably used in the production of cases and pallets where no defect cutting is required. The further increase in the efficiency of production is achieved by the automatic destacking unit VacuSpeed.
The version including auto infeed length identification is also available with full optimization.

Model 11 KE

For automatic defect cutting and cutting to length from a cutting list
This model is equipped with a luminescent scanner for cutting out defects that have been marked with crayon lines. Clear pieces between defects are cut according to a preset cutting list. Like the 11 E this machine also gives preference to the longest possible preset length.
Defects are marked with a special crayon. According to the number of defects to be cut out, one to three markers are required to ensure that the machine is continuously fed with lumber. Standard infeed is equipped with two marking stations.

Model 11 MKL

For automatic length cutting with full optimization
The fully equipped model 11 feeds the marked lumber through a measuring station where its full length is measured and scanned for crayon marks. The board will be optimized according to the data and the cutting list by the MAXI 4.0 control.
The luminescent scanner in the measuring station recognizes the crayon marks on the lumber.
A full optimization of the lumber is only possible on model 11 MKL. Only if the control knows all the board data the fixed lengths in the cutting list can be combined in such a way that either...

• waste is reduced to a minimum or...
• certain lengths are cut with priority or...
• the lumber is optimized according to different qualities or...
• according to prices or...
• a value optimization across grade lines is carried out