Click to enlarge image.

Description:

SI 400 VANGUARD - 5 axis automated 16" saw with Windows™ Touch Screen color programmer, powered (rip fence, scoring saw, and blade group adjustments), rotating crosscut support, and digital crosscut fence stops.

• 9 hp, 3 phase
• Multi-shift production
• Color touch screen electronic programmer for rip fence, powered scoring adjustment and blade group adjustment, with memory capacity up to 999 programs with 6 cuts per program (5,990 sequences)
• "EASY" automatic calculation of mitre stop positions for angled cuts
• Windows™ operating system running on a Pentium CPU
• Cross cut fence with independent digital "L.E.D." readout of crosscut fence stops position
• Rotating crosscut support table with telescopic roller with digital readout for mitre angle

Click to enlarge image.

The VANGUARD color 5 axis programmer controls blade raise & lower, blade tilt, rip fence position, scoring height, and scoring left to right. Standard on the SI 400 VANGUARD Sliding Table Saw ONLY.

Windows™ operating system running on a Pentium CPU

Click to enlarge image.

The double trunion assembly for the blade tilting is part of the blade group casting. This eliminates the possibility of misalignment which exists when these parts are bolted in the place as some manufacturers do. Others used a small pivot pin to hold up the saw group.

Click to enlarge image.

Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. This system eliminates the need for shims and the constant adjustment they require. t is fully adjustable in 0.1mm increments.

Click to enlarge image.

The steel squaring frame support ensures rigidity and allows the crosscut fence to be mounted in the front or back position. The support also has a quick slide release and articulating arm. The crosscut fence sets easily for miters yet will reset to square with very high reliability.