Click to enlarge image.

Description:

The T130 E3 is a state-of-the-art shaper. It has a very robust structure and three axes control of the spindle height, infeed fence, and outfeed fence. The “EASY” three axes programmer features automatic set up and has the capacity to store up to 300 programs. The “FAST” sectioned table eliminates the need for insert rings.

• 3 Axes “EASY” controller for infeed / outfeed fence and spindle position with the ability to store up to 300 independent programs
• 1 1/4 Inch interchangeable spindle
• 5 Spindle speeds from 3,000 to 10,000 rpm
• Aluminum fences
• Flex: swing support fence with automated control
• Fast: Sectioned Table
• Reverse rotation switch
• LED digital readout of spindle height, and infeed / outfeed fence position on controller
• Mechanical brake
• Magnetic starter with overload protection
• Low tension circuit (110v by transformer)
• Tool kit with spare V-belt
• Y— Delta Soft Start

The “EASY” programmer controls three axes - the spindle height, the entire fence position in relation to the tool diameter, and the position of the infeed fence in relation to how much material is being removed. With a memory capacity of 300 programs, it easy to set up the T130 E3 for those profiles you use frequently. Or, you can use the manual function for precise control of those one-off jobs. The “EASY” easy programmer provides a digital readout for the positioning of all three axes in addition to the spindle speed.

The flex fence allows the fence to swing out of the way for quicker setups. This system is guaranteed to remain square every time.

With a sectioned table there is no longer any wasted time searching for that correct table ring to fit your cutterhead. This table design has been used on our Superset moulders and the technology has been transferred to our shapers. The table is simply cranked into the best position to fit your cutter.

Click to enlarge image.

Monoblock technology is used in the design and fabrication of this base. The solid, welded base undergoes a treatment call normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.

Click to enlarge image.

One thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles to using stacked tooling. SCMI ensures maximum quality in its shapers by using very large spindle assemblies whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.

All SCMI shaper spindles are completely assembled and high speed balanced as one complete unit which further ensures vibration free performance.

Click to enlarge image.

All SCM Shapers include a healthy 5.5 inch tool capacity under the nut. Coupled with the digital indicator for the spindle height, this makes the SCMI shapers perfect for the use of stacked tooling. For example, many woodworkers use a tooling package consisting of three cutters for making cabinet doors. The stile, rail, and panel cutters are all mounted on the same spindle. By raising or lowering the spindle, it is possible to perform all three operations without changing the cutter or the spindle.