• Minimum 25mm (.984”)
• Maximum 305mm (12.007”)

• Minimum 10mm (.393”)
• Maximum 200mm (7.874”)

The machine bed is of thick steel with strongly ribbed structure and MONOBLOC supporting base. The sturdiness and weight of the base reduce vibrations to a minimum as well as guaranteeing life-long constant, high quality performance. All guideways and dovetails are of solid cast.

* Simplicity eliminates “trial and error” setups *

This is a patented, exclusive SCM device allowing very easy and quick set-up in every case of tool substitution. All spindles are equipped with the "SET UP" quick adjustment system, which allows the operator to set-up the machine in one single step. Simply enter the minimum diameter of the tool (in the case of a top horizontal spindle), and the tool itself, tool-working thickness, front pressers and feed rollers are automatically repositioned.

Topset Advantage

Infeed worktable of tubular steel with parallelogram system vertical adjustment and complete with hardened insert placed before planer spindle. Worktables are of hardwearing special cast iron with low coefficient of friction, and are equipped with mobile inserts in front of the vertical spindles.

The right in-feed fence has a parallelogram system width adjustment and a pre-straightening function through reference engraver (tool not included). Right fences have easily adjustable sectors for correct positioning according to tools and profiles used.

Spindles have a hardened surface to avoid wear and are fitted with radial bearings in pairs on the front part of the spindle. The 120 mm (4 ¾”) steel spindle cylinder ensures the maximum stiffness and precision even during heavy duty machining.

Topset Advantage

The beam, which supports the feed system, is of a tubular ribbed structure with independent powered rise and fall. Feed rollers are driven through a set of hardened gears with oil bath lubrication (rear end) and universal joints, guaranteeing maximum reliability and constant feed even during heavy duty machining. Feed rollers are pneumatically pressurized with three independent pressure control circuits (before planer spindle, between planer spindle and top horizontal spindle and after top horizontal spindle) enabling optimal feed in accordance with the work-piece to be processed. Spindles and feed rollers are made of steel with hardened surfaces.

Three powered rollers located in the worktable provide further improve feed reliability during machining. An idle horizontal pressure roller equipped with pneumatic exclusion from the control panel and placed before the planer spindle on the left hand infeed, enables feeding of even narrow work pieces. Feed speed can be adjusted from operator's position through an inverter.

Spindles and feed rollers are made of steel with hardened surfaces.

PHT (Nip Infeed) SYSTEM:

A pair of top/bottom floating powered rollers positioned in-feed enable the work piece to be reliably fed even with warped, damp or resinous wood. This feature creates a “Push-Feed” effect for the utmost in feeding power

Topset Advantage

AUTOMATIC FEED SYSTEM ALIGNMENT WITH TOP HORIZONTAL SPINDLES:

• Under normal working conditions, the feed rollers are aligned with the minimum diameter of the tool (i.e., the pressure shoes).
• When machining batches with considerable thickness variation, the steel feed rollers can be lowered in order to optimize the feeding. Once the work has been completed, simply turn the switch to re-align the rollers.
• To remove a jammed workpiece from the machine, the steel rollers can be raised without moving the top spindle or the pressure shoes. Once the workpiece has been removed, simply turn the switch to re-align the rollers.

RECEDING CHIPBREAKER:

The pressure shoe placed in front of the top horizontal spindles is equipped with parallelogram movement and pneumatic pressure adjustment.

Topset Advantage

Adjustment of head units is controlled from the front of the machine with mechanical digital readout of position. Work piece section is displayed on electronic decimal readouts placed on machine front.

All controls are placed on the front of the machine at a suitable height for easy use. The fully enclosed booth ensures low emission of noise and dust while guaranteeing a full view of the machine at the same time.

Topset Advantage