|
|
Sandya 5/S
43" and 53" Wide Belt Sanders
|
|
 Click to enlarge image. |
Description:
This 43" and 53" wide belt sander is designed for shops requiring more width capacity than the standard 37" offers. Ideal machine for the small-to-medium production shop that demands wider sanding width capabilities when sanding solid wood and veneer applications.
|
Major Features:
- Grooved rubber coated pressing rollers before and after working unit
- 1HP variable speed feed motor 3.5-18 m/min (12-60 FPM)
- LOGIC 50 controller
- Y-Delta two-stage reduced voltage starter on main motor
- Automatic Electronic Table Positioning Device
- In-feed / Out-feed extended tables for easier part feeding
- Pneumatic On/Off selector of both rollers and pad
- Adjustable sanding drum and pad position for micro precision adjustment
- Electronic digital thickness readout of work table position
- Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability
- Electronic tracking of abrasive belt
- Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt
- Front and rear emergency stop buttons
- Amperage meter for main motors allows maximum utilization of available horsepower
- Main disconnect switch with the ability to be locked out by padlock
- In feed flexible steel hold down, and anti kick back plate
- 50 shore, negative profile (waffle style) rubber feed mat
|
|
Available Models
|
SANDYA 5/S RCS 110 SW |
43” Two Head Wide Belt Sander |
SANDYA 5/S RCS 110 VN |
43” Two Head Wide Belt Sander |
SANDYA 5/S RCS 135 SW |
53” Two Head Wide Belt Sander |
SANDYA 5/S RCS 135 VN |
53” Two Head Wide Belt Sander |
SANDYA 5/S RRCS 110 SW |
43” Three Head Wide Belt Sander |
|
|
SANDYA 5/S RCS 110 SW
43” Single Head Wide Belt Sander
|
SANDYA 5/S RCS 110 VN
43” Single Head Wide Belt Sander
Back to Models
|
Sandya 5/S RCS 110 SW/VN |
|
Working Width
|
1100mm (43”)
|
|
Number of Heads Available
|
2
|
|
Feed Motor
|
1 HP
|
|
Maximum Work piece Thickness
|
170mm (6.69”)
|
|
Minimum Work piece Length
|
12.5 inches
|
|
Abrasive Belt Size
|
43” X 85”
|
|
Compressed Air Requirements
|
6 Bar (88 PSI.)
|
|
Dust Outlets
|
2 outlets @ 160mm (6.25”)
|
|
Exhaust Requirements
|
2380 CFM
|
|
Power Requirements
|
120 amps @ 230 Volts/3 phase
|
|
|
1st Working Unit
|
Working Unit Type:
|
Roller:
|
|
Motor Hp:
|
24 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
Steel
|
|
Abrasive Belt Length:
|
85”
|
|
|
2nd Working Unit
|
Working Unit Type:
|
Combination Head:
|
|
Motor Hp:
|
18 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
45 Sh Rubber
|
|
Platen Size:
|
60m (2.36”)
|
|
Platens Included:
|
Two
|
|
Abrasive Belt Length:
|
85”
|
|
|
SANDYA 5/S RCS 135 SW |
SANDYA 5/S RCS 135 VN
Back to models |
|
Working Width
|
1350mm (53”)
|
|
Number of Heads Available
|
2
|
|
Feed Motor
|
1 HP
|
|
Maximum Work piece Thickness
|
170mm (6.69”)
|
|
Minimum Work piece Length
|
12.5 inches
|
|
Abrasive Belt Size
|
53” X 85”
|
|
Compressed Air Requirements
|
6 Bar (88 PSI.)
|
|
Dust Outlets
|
2 outlets @ 195mm (7.75”)
|
|
Exhaust Requirements
|
3544 CFM
|
|
Power Requirements
|
120 amps @ 230 Volts/3 phase
|
|
|
1st Working Unit
|
Working Unit Type:
|
Roller:
|
|
Motor Hp:
|
24 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
Steel
|
|
Abrasive Belt Length:
|
85”
|
|
|
2nd Working Unit
|
Working Unit Type:
|
Combination Head:
|
|
Motor Hp:
|
18 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
45 Sh Rubber
|
|
Platen Size:
|
60m (2.36”)
|
|
Platens Included:
|
Two
|
|
Abrasive Belt Length:
|
85”
|
|
|
SANDYA 5/S RRCS 110 SW
Back to models
|
|
Working Width
|
1100mm (43”)
|
|
Number of Heads Available
|
3
|
|
Feed Motor
|
3 HP
|
|
Maximum Work piece Thickness
|
170mm (6.69”)
|
|
Minimum Work piece Length
|
12.5 inches
|
|
Abrasive Belt Size
|
43” X 85”
|
|
Compressed Air Requirements
|
6 Bar (88 PSI.)
|
|
Dust Outlets
|
3 outlets @ 160mm (6.25”)
|
|
Exhaust Requirements
|
3750 CFM
|
|
Power Requirements
|
192 amps @ 230 Volts/3 phase
|
|
|
1st Working Unit
|
Working Unit Type:
|
Roller:
|
|
Motor Hp:
|
30 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
Steel
|
|
Abrasive Belt Length:
|
85”
|
|
|
2nd Working Unit
|
Working Unit Type:
|
Combination Head:
|
|
Motor Hp:
|
24 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
65 Sh Rubber
|
|
Abrasive Belt Length:
|
85”
|
|
|
3rd Working Unit
|
Working Unit Type:
|
Combination Head:
|
|
Motor Hp:
|
18 hp
|
|
Motor Type:
|
Single Speed
|
|
Abrasive Belt Speed:
|
18 mps
|
|
Drum Size:
|
140 mm (5.5”)
|
|
Drum Type:
|
45 Sh Rubber
|
|
Platen Size:
|
60m (2.36”)
|
|
Platens Included:
|
Two
|
|
Abrasive Belt Length:
|
85”
|
|
|
Hermance Machine Cutterhead
Used Woodworking Machinery Exchange
