Steff 2033
Productivity
The STEFF 2033 is a versatile, medium duty 3-roller, 8- speed feeder that can be very easily assembled, dismantled and adjusted to different feed directions and needs. Also, its new patented feature (SHS) guarantees remarkable economic advantages over other feeders of the same class. It may be installed on a:
- Combination Machine
- Table Saw
- Spindle Shaper
- Jointer
- Sander
- Router
- Planer
Thanks to an excellent roller-spring suspension, it is possible to work with pieces of different thickness and to obtain an uniform and delicate approach to the cutting tool, avoiding dangerous kickback due to knots and other flaws in the wood.
Quality
A careful study of the lubrification and greasing of the moving parts allowed to obtain minimum wear and maximum silence during the working. Our rollers, of natural para rubber 60 shore, are the results of many tests which have been carried out to guarantee the best drive and a longer life. The solidity of the support with cast iron base and cross, very thick refaced tubes and aluminum handwheels, the strong locking, all guarantee an easy and safe working.
Safety and Security
The connection points of our universal support are provided with a safety device in compliance with the strictest EC standards. Using the feeder allows to work safely, preventing even the less skilled operators from getting hurt out of carelessness.
Self-Lubrication
The
drive unit assembly is fitted on screened rolling ball bearings
(6002 Z2); this allows to reduce the inner friction by 60% and
optimize the structure, which now complies completely with EEC
standards. In fact, these changes have resulted in a
maintenance-free, environment-friendly, reliable driver.
Self-Hub System
A new patented system (SHS) that guarantees remarkable economic advantages, it is possible to save up to 51% on the rollers wear: the two aluminum hubs are independent of the rubber wheel, they need no replacement and prolong the rubber's life.
Technology
- Electrostatic powder painting.
- When the roller has worn out, only replace the rubber covering.
- Sintered and carbon-trided gears.
- External interchangeable gears with fast clutch.
- Aluminum bronze gear.
- Rubber rollers, hardness 60 shore.
- Gauged springing for the piece's adhesion, for a correct working.
- Maintenance-free, no lubrication is needed.
- Rapid Positioning.
Applications
| Positioning of the machine on a circular saw. | Positioning on a planing machine. | Possibility of working at 90 degrees. | Positioning on a routing machine. |
Dimensions
Reach and Working Measurements
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| * Voltage available 230v 3 phase, 230v 1 phase, 440v 3 phase | ||||||||||||||||||||||||||||||||||||||||
