SM-523L - 9" 5 Spindle Super Duty Moulder

Machine Features:

• Feed speeds ranging from 20' ~ 98' per minute are a standard feature, faster feed speeds up to 120" per minute are available
• The full safely enclosure cover as chips guard and helps to reduce noises
• Table surface is hard-chrome plated for maximum wear resistance
• All manually adjusted turning parts are housed in dry hearings for oil-free lubrication
• One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity
• The smooth initial feeding of the stock is achieved by the independently powered infeed rollers
• All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy
• Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request
• Fence adjusted is quickly accomplished by a quick-setting lever
• The Three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect
• The entire motion controls of the machine are centralized on the control panel for convenient operations
• All control levers for the spindles are located at the front of the machine for convenient adjustment
• Each spindle is provided with a mechanical digital read out, that giving accurate adjustment
• The pressure roller for short stork can be fast raised, providing maximum convenient while cutter changing or setup
• The device permits the feeding of short stocks with a minimum length of 8"
• Vertical spindle adjustment up to 80 mm, it allows to fit several tools on the vertical spindle, eliminating troublesome cutter change
• Separate adjustment of vertical spindle and insert table, permits the table to be position extremely close to the cutter head for added cutting stability
• The front pressure plate features draw-back performance. Which fully avoid damage on cutters caused by an over-height work piece
• The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining
• An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running
• The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock
• The spindles are lubricated by the centralized lubrication system for convenience

Machine Specs:

Min and Max Working Width:

3/4" ~ 9"

Min and Max Working Thickness:

1/4" ~ 5"

Min. Working Length:

8"

1st Spindle Horsepower:

10-hp

2nd, 3rd Spindle Horsepower:

10, 10-hp

4th, 5th, 6th Spindle Horsepower:

20, 15 , ~ -hp

7th Spindle Horsepower:

~

Feed Motor:

7-1/2-hp

Elevation:

1-1/2-hp

Spindle Diameter:

40 MM

Cutter Speeds:

7200 RPM

Variable Feed Speeds

17 ~ 66 FPM

Cutterhead Diameter:

   1st Bottom Head:

4" ~ 6"

   2nd ,3rd Vertical Head:

5" ~ 6-1/4"

   Top Head:

5" ~ 7-3/4"

   Last Bottom Head:

4" ~ 10"

Pneumatic Air 90 PSI:

5 CFM

Dust Outlet Diameter:

5" x 5

Gross Weight:

10500 LBS