The Compact series moulder comes with 1 to 9 heads with an optional universal head or rip attachment. The Compact has a width capacity of 9"(230mm), 10.2"(260mm), 12"(305mm), or 13"(330mm). The Compact has a thickness capacity of 6"(150mm), 8"(205mm), or 10"(255mm).

Technical Specifications:

• 1 to 9 Heads & optional Universal Head or Rip Attachment
• Width Capacity - 9”(230mm), 10.2”(260mm), 12”(305mm) or 13”(330mm)
• Thickness Capacity – 6”(150mm), 8”(205mm) or 10”(255mm)

Outstanding Features:

• Full Sound & Safety Enclosure
• One-piece, cast iron machine frame is specially heat treated for std. configurations.
• Extra Heavy Feed Beam supported at each end of the beam on 2 large support columns
• Feed System is a Heavy Duty Cardan Shaft with very heavy gearboxes and universals
• More Powered Top & Full Width Bottom Rolls then most of our competition
• Pneumatic pressure of the Top Feed Rolls can be easily set
• Pneumatic Pressure to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s)
• Precision Spindle Assemblies each including 4 Precision Bearings for highest tolerances
• Spindles Speeds are std. 6,000 rpm and 7,200 rpm is optional
• Each spindle is driven by an individual motor
• Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates and Main Guide
• Dual Digital Counters on Near Side Head & Top Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s).
• Automatic Table Lube System included
• Central lubrication system
• Complete set of cutter heads
• Electrics to UL/CSA Standards and are 230/460 or 575/3/60 – con convert to single phase optional
• Some Options that are available

Some options that are available:

• 10.2”, 12” or 13” Width and/or 8” or 10” Thickness
• REC Setworks Programmable controller for convenient thickness and or width of cut settings.(optional)
• Hydro-Loc Outboards for horizontal spindle support on wider machines
• Grooved Beds for very Short Stock Feeding
• Universal Head or Rip Attachment is optional
• CE Specifications and 380 or 415/3/50 electrics also available