Cantek JDT-65 Manual Dovetail Machine
With the Cantek JDT-65, you can produce the best dovetail joints without any stress or challenge. This manual dovetail machine keeps materials in place by using highly efficient air clamps. It also promotes cutting accuracy with the built in indication bar. You can adjust both the tenon and mortise depth based on your material’s thickness. The Cantek JDT-65 also features one four-sided template.
- Features
- Efficient spindle system that guarantees the most clean cut
- Pneumatic clamps for workpiece placement
- Easy operation to produce the perfect dovetail joint
- Fitted with 1HP spindle motor
- Protect drawer components with the anti-tear out blocks
- Dust collection port at the machine’s back portion
- Voltage: 230V single phase only!!!
| Min. workpiece size | 7.9" x 2.4" |
| Max. workpiece size | 59" x 16.5" |
| Min/Max dovetail height | 0.2" ~ 7.1" |
| Min/Max front thickness | 0.28" ~ 2.36" |
| Min/Max side thickness | 0.28" ~ 3.6" |
| Number of spindles | 1 |
| Spindle speed (RPM) | 18500 RPM |
| Dovetail spacing | 1", 1.5", 2", 2.5" |
| Table height from floor | 46.5" |
| Dust collection ports | front: 2.5" / rear: 4" |
| Air pressure required | 6 bar |
| Motor power | 1 HP |