The BRF was designed to handle the toughest applications. Its robust cleaning system is designed to run 24/7 with little annual maintenance. It’s high volume rotary action cleaning system insures maximum performance with nearly 1,000 CFM continuous back flush per filter. The BRF has a tool free man door to access the filters for easy tool free change out.
Cleaning System
• 10hp 230/460/3/60 self-contained Cleaning fan
• Reverse air sweep arm driven by a ½ hp drive motor
• Factory Assembled and tested
Filter Access
• This is the best built door in the dust collection industry!
• Door opens and shuts like a fine automobile yet has the strength of an armored vehicle.
• Military grade door latches. Same latches used on U.S. military armored fighting vehicles.
• Internal weather proof hardware.
• Tool free single handed operation.
• Lockable door handle.
• Tool free filter change out with Even Lock™ technology.
Weather hood w/screen for outlet
Base Filter with Tangential Inlet
• Tangential inlet allows the material to be separated by a cyclonic spinning action causing the heavy materials to fall out before they get to the filters
• With this option we have included our unique perforated cone section with an internal vortex tube
• This is the best designed unit on the market. Originally designed for tough applications like tire recycling, and paper dust. Great for anything from fine dust to heavy chips and fibers.
(152) 10’ Bags, 16 oz. Polyester, Singed, Ground Wire
(152) 10’ Cages, Top Removal, Zinc Plated
Ladder & cage for 60° hopper
Service Platform
• Filter access platform runs the entire length of the collector door
• Handrails and anti-skid grate for walking platform
• Complies to OSHA standards
• Secondary platform on options where needed comply with OSHA 30’ rule
Support structure for 60° hopper
• Painted to match filter housing
• Seismic zone 3 construction based on 100 MPH wind load.
• Bolted construction
• Structural steel stand to give 6’ clearance under hopper discharge prior to the airlock.
Discharge Transition to 16” HD Airlock
• This option is for a transition from the standard 40” dia. Outlet
Magnehelic Gauge Kit
• Magnahelic Gauge from 0” to 10”. Base Model. No controls for auxiliary equipment.
(2) Explosion Vents
• Rupture style membrane vents
• Stainless steel sanitary construction
• All vents are sized based on material being classed at a ST1 with a 200 KST or lower value.
• Includes Burst Indicator used to activate alarms, bells, remote annunciators or interfaced with process control systems.
16” Fabricated HD Rotary Airlock
• 230/460/3/60 2HP premium E motor
• Adjustable motor mount motor base
• Heavy duty gearbox
• Chain guard
• 2 7/16” dia. Shaft
• Flexible rubber tips and side blades
• + / - 20” W.C.
System Control Panel
• ATS22 Series Soft-Start (rated for 75hp) for 60hp fan
• Telemecanique starters with branch breakers for 40hp fan, 10hp cleaning fan, 1/2hp cleaning arm, and 2hp airlock
• 175 amp main breaker
• Preprogrammed PLC for startup and shutdown sequence.
• Control Transformer with Fusing
• Illuminated e-stop, push pulls, and keypad for the soft-start to be mounted in the door
• NEMA 4 Enclosure with back panel
Cleaning System
• 10hp 230/460/3/60 self-contained Cleaning fan
• Reverse air sweep arm driven by a ½ hp drive motor
• Factory Assembled and tested
Filter Access
• This is the best built door in the dust collection industry!
• Door opens and shuts like a fine automobile yet has the strength of an armored vehicle.
• Military grade door latches. Same latches used on U.S. military armored fighting vehicles.
• Internal weather proof hardware.
• Tool free single handed operation.
• Lockable door handle.
• Tool free filter change out with Even Lock™ technology.
Weather hood w/screen for outlet
Base Filter with Tangential Inlet
• Tangential inlet allows the material to be separated by a cyclonic spinning action causing the heavy materials to fall out before they get to the filters
• With this option we have included our unique perforated cone section with an internal vortex tube
• This is the best designed unit on the market. Originally designed for tough applications like tire recycling, and paper dust. Great for anything from fine dust to heavy chips and fibers.
(152) 10’ Bags, 16 oz. Polyester, Singed, Ground Wire
(152) 10’ Cages, Top Removal, Zinc Plated
Ladder & cage for 60° hopper
Service Platform
• Filter access platform runs the entire length of the collector door
• Handrails and anti-skid grate for walking platform
• Complies to OSHA standards
• Secondary platform on options where needed comply with OSHA 30’ rule
Support structure for 60° hopper
• Painted to match filter housing
• Seismic zone 3 construction based on 100 MPH wind load.
• Bolted construction
• Structural steel stand to give 6’ clearance under hopper discharge prior to the airlock.
Discharge Transition to 16” HD Airlock
• This option is for a transition from the standard 40” dia. Outlet
Magnehelic Gauge Kit
• Magnahelic Gauge from 0” to 10”. Base Model. No controls for auxiliary equipment.
(2) Explosion Vents
• Rupture style membrane vents
• Stainless steel sanitary construction
• All vents are sized based on material being classed at a ST1 with a 200 KST or lower value.
• Includes Burst Indicator used to activate alarms, bells, remote annunciators or interfaced with process control systems.
16” Fabricated HD Rotary Airlock
• 230/460/3/60 2HP premium E motor
• Adjustable motor mount motor base
• Heavy duty gearbox
• Chain guard
• 2 7/16” dia. Shaft
• Flexible rubber tips and side blades
• + / - 20” W.C.
System Control Panel
• ATS22 Series Soft-Start (rated for 75hp) for 60hp fan
• Telemecanique starters with branch breakers for 40hp fan, 10hp cleaning fan, 1/2hp cleaning arm, and 2hp airlock
• 175 amp main breaker
• Preprogrammed PLC for startup and shutdown sequence.
• Control Transformer with Fusing
• Illuminated e-stop, push pulls, and keypad for the soft-start to be mounted in the door
• NEMA 4 Enclosure with back panel