Logo

Order By Phone Today

  1-866-326-8131

MON-THURS 7:30am-5pm EST
FRI 8am-3pm EST

SCM Olimipic K 560 HP ERT

Item #: K560HPERT
Brand: SCM
Model: K560HPERT
Condition:
Year Mfg:

Reg Price: $115,000.00

Our Price: $115,000.00

Quantity

Additional product photos. Click to view larger.

K 560 HP/ERT – Single Sided Edgebander

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

Machine Base
The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

Electronic Top Pressure Beam
All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. 

Capacities and Speed

•    Edgebanding thickness: .4mm - 8mm (.016-5/16”)
•    Guillotine capacity: 3mm
•    Feed speed: 40-60 ft/min.
•    Panel height: 3/8” min – 2 1/8” max
•    Minimum panel length: 5 1/2”
•    Minimum panel width: 2 3/8”
•    Minimum distance between panels: 20” 

Glue Station
Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another. Pneumatic locking of the glue roller at the end of the panel to prevent any excess glue on the trailing edge of the panel. 

Servo Driven Pressure Section
There are a total of four pressure rollers for pressing the banding to the workpiece edge. The first roller is powered and is also Teflon coated to prevent the banding material from slipping. The three idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with servo driven positioning that requires no manual intervention from the operator. The glue pot is Teflon coated and has a 3.35lb. capacity. Comes equipped with a quick change feature that allows the operator to remove the glue pot in less than two minutes. 

SGP Glue Pot 
Quick heat up time due to the small glue pot. Reverse rotation of the glue roller for the application of solid wood. Double Thermo Regulation for easy use of both EVA and PUR glue. Color change and glue pot cleaning are able to be completed in minutes, as opposed to hours. 

PC 21” Controller
The K 560HP comes equipped with the Maestro Pro Edge controller, a 21” industrial multi touch screen. Comes standard with a Windows operating system. Capable of storing an unlimited number of programs. Monitors statistical data, as well perform diagnostic functions and program functions. 1920 x1080 resolution, intuitive interface. Monitors the number of panels processed, the amount of material applied, the number of hours run, the distance the feed track has turned, etc. Maintenance schedules are monitored for various stations throughout the machine. Swivels 270 degrees for easy access..

Anti-Adhesive
The machine comes equipped with an anti-adhesive unit positioned prior to the pre milling unit. It prevents the buildup of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti-adhesive liquid. 

Adjustable Infeed Fence
The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

Air Cushion Table at Machine Entry 
Air cushion table located at machine infeed to help facilitate the loading of panels, especially panels of large dimensions. It includes the extension of the machine entry infeed fence. It is not possible to have the narrow feed option on the machine. Table dimensions are 1,600mm x 600mm.
 
RT-V Pre-Milling Station:
To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC.  The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

K-SEL 2” End Trimming Station
This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. 

R-HP Multi Edge 2R Trimming Station  
This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with servo positioning to process TWO different radii and infinite thin edges all through the controller. Independently controlled positioning, ie radius on top and straight edge on the bottom. Four different controlled axes adjustments.  The unit has top/bottom/side copy wheels. The motors have quick release plugs to facilitate tooling changes. The unit is equipped with a three roller nesting kit as standard, for processing panels with hinge holes and grooves.

“ROUND-X” Multi Edge Corner Rounding Unit: 
Two independent .50hp motors that slide on THK guides ensuring the highest quality finish. Servo positioning allows for the finishing of various thin edges and thick edge. Two controlled axes adjustments through the controller. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 2mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 2mm PVC, through the controller, with no manual adjustments by the operator.  

RAS Multi Edge 2R Profile Scraping Station
The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with servo positioning to process TWO different radii. Includes tool with two different radii, four controlled axes adjustments and the ability to independently control the top from the bottom.  It has a large diameter horizontal copy wheel and side copy wheel device. The unit comes standard with a three roller nesting kit for panels with hinge holes or grooves. 

RC-V Glue Scraping Unit
The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with double copy wheels on the top and bottom of the panel, air blowers are standard to help keep the knives clean, the off fall is collected in the collection bin and it is pneumatically positioned through the controller. 

SP-V Buffing Unit
The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish.

Acoustical Safety Enclosure
All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. 

Centralized Dust Extraction
Machine comes with two 3” ports for the premilling station, two 2” ports for the top and bottom trim station and one 3” port for the 3mm collection bin for extraction.

 Technical Specifications
 
Glue Pot Unit: 
   Heating TimeApprox. 8-10 min.
   Glue Capacity3.3 lbs.
Pre-Milling Unit: 
   Horsepower2.0 HP (2)
   RPM19,000 RPM
   Height49mm
   Max. Stock RemovalAdjustable
End Cutting Trimming Station: 
   Horsepower.25 HP (2)
   RPM12,000 RPM
   Tilting2 preset positions
Edge Trimming Unit: 
   Horsepower.70 HP (2)
   RPM12,000 RPM
   Cutting ToolsCombination Cutters 1/2mm
Corner Rounding Unit: 
   Horsepower.50 HP (2)
   RPM12,000 RPM
   Cutting Tools2mm Radius
Scraping Unit: 
   Knife RadiusCombination Cutters 1/2mm
Buffing Unit: 
   Horsepower.25 HP (2)
   RPM2,800 RPM
   Diameter/Bore152mm/17mm
Feed Motor Horsepower2 HP
Feed Speed40-60 FPM
Frequency Converter200 Hz
Dust Hood DiameterPer Drawing
Pneumatic Operating Pressure90 PSI
Machine Weight:4,332lbs.
Electrical:67 amps @ 230v three phase
Dust:3,250 cfm
Dimensions (LxWxH):188” x 67” x 59” (add 52” for air flotation table)