K230B EVO Single Phase

K230 B EVO– Single Sided Edgebander

• End Trim
• T/B Trim
• Glue Scrape
• Buff
• Edgebanding thickness: .4mm - 3mm (.016-1/8”)
• Guillotine capacity: 3.0mm
• Feed speed: 30 ft/min.
• Panel height: 3/8” min – 1 15/16” max
• Minimum panel length: 5 1/2”
• Minimum panel width: 2 3/8”
• Minimum distance between panels: 22” 

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 3mm.

Machine Base

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

Pressure Beam

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has digital height indicators and a double row of pressure rollers with steel bearings.

Glue Station

Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes.  The unit is also equipped with a quick disconnect plug for changing from one pot to another.

Pressure Section with Automatic Strip Magazine

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered, it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section.

SGP-E Glue Pot

Quick heat up time due to the small glue pot. Reverse rotation of the glue roller for the application of solid wood. Double Thermo Regulation for easy use of both EVA and PUR glue. Color change and glue pot cleaning are able to be completed in minutes, as opposed to hours.

Control Panel

The K 230B is equipped with a Orion 1 Plus controller, fixed, located at the infeed of the machine. It is capable of operating all the work units via soft touch buttons, it pneumatically tilt’s the end trim unit from the control panel, it eliminates the use of micro switches, as well as control the temperature of the glue. It is tilted slightly upward for a more ergonomically friendly position for the operator.

End Trimming Station

This unit is composed of two independent .25 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with pneumatic positioning of the unit from the control panel with two preset positions. The unit is also equipped with the “radius” edge feature that rounds over the vertical edge on the corners of a 3mm panel.

Edge Trimming Station 

This unit is composed of two independent .5 hp motors operating at 12,000 rpm. The unit is equipped with a combination cutter that allows the operator to manually go from solid wood, to thin material, to a radius, all with the same cutter. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes.

RC-M Glue Scraping Unit

The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with air blowers to help keep the knives clean, it has a reversible knofe and manual positioning.

Buffing Unit

The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish.

Acoustical Safety Enclosure

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents.  The hood has a safety microswitch which prevents the machine from operating when the hood is open.

Centralized Dust Extraction

Two 2” dust ports and one 3” dust port for extraction.

 Technical Specifications