For woodworkers looking for the capability of feeding smaller parts that tend to wobble or chatter with standard 3 and 4 wheel feeders, the DC70 is the perfect fit. The patented 7 Wheel Variable Speed Power Feeder is commonly used for cabinet door parts on a shaper and when climb-cutting by preventing the part from taking off due to its 7 hold-down points.
Features
1. Capable of Feeding Short-Stock
Feed shorter parts while maintaining secure hold-down due to the shorter distance between the polyurethane rollers from center to center
2. Instant 90° Memo-Locking Swivel Adjustment
Swivel the power feeder and lock it in instantly - perpendicular or parallel to the fence with the memo-locking feature not found on standard stock feeders.
3. Variable Speed & Digital Controls
No more gear change-out. Easily identify your feed rate and change the speed with the turn of a button at 1 fpm increments until you reach your desired speed from 7-86 fpm
4. DC Brushless Servo Motor
Save over 75% in energy costs while producing similar torque as 1 horsepower AC motor feeders, especially at lower speeds
Features
1. Capable of Feeding Short-Stock
Feed shorter parts while maintaining secure hold-down due to the shorter distance between the polyurethane rollers from center to center
2. Instant 90° Memo-Locking Swivel Adjustment
Swivel the power feeder and lock it in instantly - perpendicular or parallel to the fence with the memo-locking feature not found on standard stock feeders.
3. Variable Speed & Digital Controls
No more gear change-out. Easily identify your feed rate and change the speed with the turn of a button at 1 fpm increments until you reach your desired speed from 7-86 fpm
4. DC Brushless Servo Motor
Save over 75% in energy costs while producing similar torque as 1 horsepower AC motor feeders, especially at lower speeds
Type | 7 Wheel Variable Speed |
Horse Power & Rotation | (2/3HP) 1-3 Phase, 110-220V; Forward/Reverse |
Range of Speeds | 7 - 86 FPM |
Roller Size | 60 x 60 mm (2.36″ x 2.36″) |
Roller Suspension | 18 mm (3/4″) |