The Powermax Finger Jointer is an advanced machine line for profiling, gluing and horizontal finger jointing of wooden parts.
Machine line consists of a profiling machine, glue applicator, press and crosscut saw. Boards of variable length are worked with a fingerjoint profile in the profile machine. During the return stroke of the carriage, glue is applied on both ends. Next the parts are brought together and pressed. Finaly the crosscut saw cuts the parts to a preset fix length.
Production Methods Include:
Defecting
Finger Joint Milling
Glue Application
Pressing
Sawing to Length
Defecting / Finger Joint Profiling / Gluing & Pressing / Sawing to length in 1 Machine-line!
Advanced Servo Drive & Control Technique
Unique combination of production methods
Allows boards up to 300mm wide
Defect crayon mark identification
Lengths: 450 - 6000+ mm
Widths: 50 - 300 mm
Thicknesses: 8 - 45 mm
Short-Piece Unit for min. lengths 200 mm
Remote Support/Management System
Electronic Height Adjustment
Machine line consists of a profiling machine, glue applicator, press and crosscut saw. Boards of variable length are worked with a fingerjoint profile in the profile machine. During the return stroke of the carriage, glue is applied on both ends. Next the parts are brought together and pressed. Finaly the crosscut saw cuts the parts to a preset fix length.
Production Methods Include:
Defecting
Finger Joint Milling
Glue Application
Pressing
Sawing to Length
Defecting / Finger Joint Profiling / Gluing & Pressing / Sawing to length in 1 Machine-line!
Advanced Servo Drive & Control Technique
Unique combination of production methods
Allows boards up to 300mm wide
Defect crayon mark identification
Lengths: 450 - 6000+ mm
Widths: 50 - 300 mm
Thicknesses: 8 - 45 mm
Short-Piece Unit for min. lengths 200 mm
Remote Support/Management System
Electronic Height Adjustment
Lengths | 450 - 6000+ mm |
Widths | 50 - 300 mm |
Thicknesses | 8 - 45 mm |