The J40 Combined Vertical/Horizontal Boring Machine is equipped with a fixed but adjustable table. For vertical boring, heads with spindles move up/down, while for horizontal boring the spindle carriage moves back & forth.
Since the table is fixed, vertical & horizontal boring can be done alternatively or simultaneously and/or the machine can be equipped with an automatic feeding device. Also, either the horizontal or vertical boring can be programmed to remain idle.
Vertical spindles and hold downs can be mounted on individual arms, on a dovetail beam or a combination thereof while horizontal spindles and hold downs are mounted on dovetail beams. The boring depth and feed speed of the spindle carriage are widely adjustable. For added flexibility in the boring patterns, spindles and/or clusters are belt driven and powered by 1, 1.5 or 2 HP three phase motors 220, 440 or 600 volts / 60 cycles.
As an option, the J-40 can be equipped with individual boring units mounted at one end of the table.
The J40 is available in 4, 5, 6, 8 and 10 foot widths.
The basic machine includes: main body, spindle carriage having a maximum travel of 8", a 24" wide wooden table of lengths specified below, hydraulic power unit, electrical control system, a 6" stroke feed mechanism for horizontal drilling, 2 air operated hold downs, 2 spring loaded hold downs, cycle foot switch and safety guard.
MODEL J-40 | SPECIFICATIONS 4 - FOOT MODEL |
VERTICAL - TABLE DIMENSIONS | 24" x 48" |
VERTICAL - STROKE | Up to 8” stroke |
VERTICAL - BORING AREA | 24” X 48” |
VERTICAL - FEED SPEED | Variable |
VERTICAL - NUMBER OF SPINDLES | As required |
VERTICAL - SPINDLE MOUNTING | On arms, dovetail beam or template |
HORIZONTAL - STROKE | Up to 6” stroke |
HORIZONTAL - BORING AREA | 6” X 48” |
HORIZONTAL - FEED SPEED | Variable |
HORIZONTAL - NUMBER OF SPINDLES | As required |
HORIZONTAL - SPINDLE MOUNTING | On a dovetail beam |
SPINDLE | 1 1⁄2” in diameter with spring collet for 1⁄2” shank |
SPINDLE SPEED | 2300 RPM |
SPINDLE MOTOR(S) | 1 HP, 208/220/440/575 volts, 3 Ph., 60 cycles |
NUMBER OF MOTORS | Quantity as required (depends on the size of the machine) |
GUARD | Clear plastic guard and individual guards on vertical spindles |
DIMENSIONS | height 72”, width 54”, depth 60” |
WEIGHT | approximate net weight: 4500 lbs. - approximate shipping weight: 5000 lbs. |
FOR OPTIONAL FEATURES | SEE BROCHURE |