The LARICK 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter and 50 inches long. It has a fixed height conveyor and accommodates parts up to 9 inches thick.
The spindles are belt driven with full power down to 450 RPM.
Speed and direction are controlled from the touchscreen.
Each motor's load is also displayed.
Inverters control the feed rate, the spindles’ speed, and rotatonal direction. Load meters aid setup and help maintain consistent results. Larger diameter sanding and wire brushes deliver best results.
As with all Larick Machines, it is designed with a small footprint, is rugged, dependable, and manufactured with as many 'off the shelf' parts as possible to minimize downtime and maintenance.
Spindle Motors: 2, 3, 5, 7.5 or 10HP
Voltage: 208-240V, 400-480V, or 575V 3ph
Variable Speed: AC Inverter, 200-900rpm
Spindles: 1.25” Dia.
Conveyor: 25, 37, 49 inch wide, 4-47 ft/min
Opening Height: Up to 9”
The spindles are belt driven with full power down to 450 RPM.
Speed and direction are controlled from the touchscreen.
Each motor's load is also displayed.
Inverters control the feed rate, the spindles’ speed, and rotatonal direction. Load meters aid setup and help maintain consistent results. Larger diameter sanding and wire brushes deliver best results.
As with all Larick Machines, it is designed with a small footprint, is rugged, dependable, and manufactured with as many 'off the shelf' parts as possible to minimize downtime and maintenance.
Spindle Motors: 2, 3, 5, 7.5 or 10HP
Voltage: 208-240V, 400-480V, or 575V 3ph
Variable Speed: AC Inverter, 200-900rpm
Spindles: 1.25” Dia.
Conveyor: 25, 37, 49 inch wide, 4-47 ft/min
Opening Height: Up to 9”