Distance between centers: 1600mm
Copying length: 1.300mm (depending on accessories like chucks, live centers, steady rests…)
Copying diameter: max. 300mm (without magazine operation)
Specific characteristics of the CHALLENGE-5000:
Headstock and machine bed made of grey cast iron
Pretensioned spindle bearing without backlash with thread M33 and MT3, hollow shaft for vacuum device.
Bearing of all linear axles with linear guideways.
Tailstock made of grey cast iron, controlled by the program or even manually, Actuated with a pneumatic
cylinder, pressure can be adjusted by the pressure relief valve, MT3
optional you can get the swivel-tool accessory for continuously cutting of balls and 90° recesses
in both directions
A wide variety of followers are available for turning very thin and long parts. A sanding unit is available which can be controlled by the program to change between pointed and flat sanding operations.
Simple and straight forward programming of machine parameters requires less training due to standard 2D-CAD-Software.
Small parts can be made in "Bar-Mode" (see videos for 5000 CNC model) Millings and groovings are possible in any thread or pitch with our milling attachment.
Frequency controlled motor. Infinitely variable by program.
Optional CNC-controlled servo-drive motor for spindle speed from 0 to 3500 rpm
Dimensions (standard): Width = 3050mm (4600mm with opened sliding door), Depth =2300, Height = 2.200 mm
Weight (standard): app. 1800kg depending on model and accessories