LMC-418 7" 4-Head Four Sided Planer.
SPECIFICATIONS
-Thickness Material .39” to 4”
-Width Material .8” to 7.1”
-Feed Speeds 23 & 46 FPM (7 & 14 MPM)
MAIN FRAME, MACHINE BED & ENCLOSURE
-1 Piece – Heavy Steel Cellular Main Frame. Specially heat treated for maximum stability and minimum vibration
-67 inch (1.7 meter) long Adjustable Straightening Infeed Table and Fence (each adjustable .4 inch)
-Lift up Sound and Safety Enclosure & safety lock – with built in lighting
DRIVE INCLUDES
-Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
-Upper support Beam is supported on large adjustable dovetail slide for best, most rigid upper beam support.
-Top Beam is manually adjustable height wise
-All feed rolls and pressures move with top beam rise and fall
-5 (1 in front of Top Head and 1 Outfeed) Top Driven Feed Rolls
-Pneumatic pressure(tension) to all top feed rolls with pressure regulator controls
-Infeed driven serrated Steel feed rolls up to top head are hardened to resist wear and prevent chips and shavings from sticking to them
-Polyurethane top feed roll after top head
-Feed roll diameter 4.7” / 120mm
-2 HP Dual Speed Drive 23 & 46 fpm
SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING
-All Heads are Standard 6000RPM (6800 rpm optional)and belt driven
-35 mm (1.38”) diameter spindles
-Precision Spindles are manufactured from SCM-440 tool steel with special heat treating to HR 55C Hardness fitted with precision high speed Bearings to provide the best in cutting stability with permanent accuracy. They are permanent grease lubed and are sealed and are impervious to dust and water.
-Edge reference straightening system with carbide referencing head
-Near Side & Top Head Spindles have radial adjustment, with mechanical digital readouts for fast and accurate setting
-Independent manual vertical adjustment to top head.
-Complete set of Carbide Cutterheads supplied for all heads for S4S
STD. HP SWING:
-Bottom Head / Top Head 10 HP shared 4”” (100 mm)
-Right Side / Left Side Heads 10 HP shared 4” (100 mm)
CHIPBREAKERS, FENCES & HOLDOWNS/HOLDOVERS, ETC.
-Tables, Bedplates and Fences are Hard Chromed
-0.8” (20mm) high fences
-HD Chip breakers before top head with vertical screw adjustment
-Double roller side pressure unit opposite fence side head moving with near side head
-Idling Holdown Roll opposite rear side head
-Left Side Head equipped with telescopic bed plate
MISCELLANEOUS features and inclusions
-Safety interlock at infeed to prevent feeding oversized or double feeding material
-Dust hoods included with hosing to exit ports
-Toolkit
-Instruction and maintenance manual, electrical diagram and parts list
ELECTRICAL
-TECO-Westinghouse – Electric Motors – excellent quality & heavy duty
-Electrics to UL/CSA Standards using Telemechanique Switchgear w/emergency stop button; main disconnect & with 230 or 575/3/60 electrics
-Machine conforms to CSA/UL & CE specifications
SPECIFICATIONS
-Thickness Material .39” to 4”
-Width Material .8” to 7.1”
-Feed Speeds 23 & 46 FPM (7 & 14 MPM)
MAIN FRAME, MACHINE BED & ENCLOSURE
-1 Piece – Heavy Steel Cellular Main Frame. Specially heat treated for maximum stability and minimum vibration
-67 inch (1.7 meter) long Adjustable Straightening Infeed Table and Fence (each adjustable .4 inch)
-Lift up Sound and Safety Enclosure & safety lock – with built in lighting
DRIVE INCLUDES
-Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
-Upper support Beam is supported on large adjustable dovetail slide for best, most rigid upper beam support.
-Top Beam is manually adjustable height wise
-All feed rolls and pressures move with top beam rise and fall
-5 (1 in front of Top Head and 1 Outfeed) Top Driven Feed Rolls
-Pneumatic pressure(tension) to all top feed rolls with pressure regulator controls
-Infeed driven serrated Steel feed rolls up to top head are hardened to resist wear and prevent chips and shavings from sticking to them
-Polyurethane top feed roll after top head
-Feed roll diameter 4.7” / 120mm
-2 HP Dual Speed Drive 23 & 46 fpm
SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING
-All Heads are Standard 6000RPM (6800 rpm optional)and belt driven
-35 mm (1.38”) diameter spindles
-Precision Spindles are manufactured from SCM-440 tool steel with special heat treating to HR 55C Hardness fitted with precision high speed Bearings to provide the best in cutting stability with permanent accuracy. They are permanent grease lubed and are sealed and are impervious to dust and water.
-Edge reference straightening system with carbide referencing head
-Near Side & Top Head Spindles have radial adjustment, with mechanical digital readouts for fast and accurate setting
-Independent manual vertical adjustment to top head.
-Complete set of Carbide Cutterheads supplied for all heads for S4S
STD. HP SWING:
-Bottom Head / Top Head 10 HP shared 4”” (100 mm)
-Right Side / Left Side Heads 10 HP shared 4” (100 mm)
CHIPBREAKERS, FENCES & HOLDOWNS/HOLDOVERS, ETC.
-Tables, Bedplates and Fences are Hard Chromed
-0.8” (20mm) high fences
-HD Chip breakers before top head with vertical screw adjustment
-Double roller side pressure unit opposite fence side head moving with near side head
-Idling Holdown Roll opposite rear side head
-Left Side Head equipped with telescopic bed plate
MISCELLANEOUS features and inclusions
-Safety interlock at infeed to prevent feeding oversized or double feeding material
-Dust hoods included with hosing to exit ports
-Toolkit
-Instruction and maintenance manual, electrical diagram and parts list
ELECTRICAL
-TECO-Westinghouse – Electric Motors – excellent quality & heavy duty
-Electrics to UL/CSA Standards using Telemechanique Switchgear w/emergency stop button; main disconnect & with 230 or 575/3/60 electrics
-Machine conforms to CSA/UL & CE specifications