Equipped with 2, 4 or 6 opposed & staggered Side Heads for sawing/slicing
2 to11 Heads - up to 8" Widths
One piece machine frame specially heat treated & stress relieved
1-1/2", 40mm, 1-13/16" or 50mm diameter spindles standard
SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
Saw (vertical shafts) 2800 - 4400 RPM
Cutterheads - 6000 RPM
Each spindle is driven by individual motors
Tables/Fences and Chipbreakers are hard chrome plated
Full Cardan Shaft drive with feed speeds up to 82 FPM
Top rolls variable pneumatic tensioned
Full width bottom driven bedrolls
Pneumatic tension top chipbreakers & roll holdovers
Easy head adjustment by mechanical digital readouts
Dual Digital Readout available for radial setting (NS & Tops)
Universal head or rip section optional
Safety enclosure serves as chip guard and greatly reduces noise
2 to11 Heads - up to 8" Widths
One piece machine frame specially heat treated & stress relieved
1-1/2", 40mm, 1-13/16" or 50mm diameter spindles standard
SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
Saw (vertical shafts) 2800 - 4400 RPM
Cutterheads - 6000 RPM
Each spindle is driven by individual motors
Tables/Fences and Chipbreakers are hard chrome plated
Full Cardan Shaft drive with feed speeds up to 82 FPM
Top rolls variable pneumatic tensioned
Full width bottom driven bedrolls
Pneumatic tension top chipbreakers & roll holdovers
Easy head adjustment by mechanical digital readouts
Dual Digital Readout available for radial setting (NS & Tops)
Universal head or rip section optional
Safety enclosure serves as chip guard and greatly reduces noise
| Working width (at a cutting circle of 125 mm.) | 200mm |
| Working height (at a cutting circle of 125 mm.) | 10-150mm |
| Number of spindles, min-max. | 2-8 |
| Basic motor capacity per spindle | 5.5 KW / 7.5HP |
| Basic motor capacity of feed | 4 KW / 5HP |
| Spindle speed | 6000 RPM |
| Spindle diameter | 50 mm |
| Tool cutting circle (first bottom spindles) min-max. | 125-160mm |
| Saw blade cutting circle (1st right & 1st left vertical spindles) min-max. | 250mm |
| Saw blade cutting circle (2nd right & 2nd left vertical spindles) min-max. | 300mm |
| Tool cutting circle (top horizontal spindles) min-max. | 100-200mm |
| Tool cutting circle (bottom horizontal spindles) min-max. | 100-200mm |
| Feed speed, infinitely variable by frequency driven motor | 6-24 m/min |
| Feed roller diameter | 140mm |
| Feed roller width | 50mm |
| Pneumatic pressure for feed rollers, max. | 6 kg/cm² (87psi) |
| Adjustment range for infeed table and edge-jointing fence | 10mm |
| Adjustment range of vertical spindles (axial) | 30mm |
| Adjustment range of horizontal spindles (axial) | 20mm |
| Length of straightening table | 2M |