Weight: 3500 - 4800lbs., MARTIN - Composite frame
Table Size: 860 mm x 1370 mm in grey cast iron; table extension as standard, designed as a 335 mm x 625 mm lockable tool tray
Table Height: 900 mm
Sliding Table: 3000 mm (9'8") standard length; table length corresponds to cut length; infinitely locking design, wear-resistant tempered guides with self-cleaning design; replaceable table lip, anodized aluminum construction
Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 8 mm drive pins
Saw Blade Replacement: "ProLock" Quick change system
Saw Blades: Ø 250 - 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades
Tilting Range: 0° to + 46°
Cutting Height: max. 204 mm / 550 mm Ø saw blade / 0°, max. 135 mm / 550 mm Ø saw blade @ +45°
Blade Width (main saw): Blades with max. 6 mm cutting width at a tilt angle of 0° to +46°, Dado max. 20 mm cutting width at a tilt angle of 0° (for USA: 3/4")
Motor Power: 5.5 kW (7.5 HP), 3Ph. 230 or 480V - 60 Hz
Rotational Speed: 2800 / 4000 / 5000 U/minSimple, comfortable speed change from the operator position through an opening in the trunnion behind the main blade
Rip Capacity: 850 mm (33.5")
Cross-cut Fence: Anodized aluminum with 2-point support and two stop elements; micro-adjustment with magnifier for inner ball bearing; dimension display with scale; length compensation for angle cuts with electronic support; cut length 190 - 2020 mm, extendable up to 3310 mm
Cross-cut Table: Galvanized steel construction, mitre cuts by scale without adjusting the stop; integrated fix positions for 0°, 22.5°, 30° and 45° cuts; single-handed clamping at sliding table; support dimensions 1340 x 650 mm
Rip Fence: Electronically controlled motorized rip fence; dimensions specified and displayed in the controller. Unique design allows fence to be lowered below table level; sensor in rip fence automatically compensates for width changes when fence is utilized in a mitre application; anodized aluminum construction riding on four grooved ball bearings.
Dust Extraction: Parallelogram saw blade guard dust port 100 mm Ø, machine frame 120 mm Ø; minimum dust extraction capacity: 880cfm at 4500fpm (V).
Guard: Blade guard with 2 sets of blade covers, supplied with 1 flat cover set for 0° cuts and one flat / bulbous blade cover set for cuts from 0° to 46°; clearance between saw blade axis and support column: 900 mm; Clearance - when blade guard is pushed back - between blade and guard arm approx. 635 mm; Guard locks in place from working position.
Standard Accessories:
* 1 Clamping shoe on sliding table
* 1 ProLock Allen key
* 1 Reset grip
* 4 Riving knife (250/350, 350/450, 450/500, 500/550)
* 1 Push stick
* 1 AIGNER push block
Control Panel: Control panel at eye level, rotatable, tiltable, and capable of being swung away, incl. document holder
Electrical Equipment: Electronic soft start and braking device; contact control of dust extraction; motor protection switch and overload protection, undervoltage protection; lockable main switch (lock-out/tag-out), 2 EMERGENCY STOP buttons (control panel, frame); 3Ph. 230 or 480 V, 60 Hz. Compliant with UL/CSA regulations.
Table Size: 860 mm x 1370 mm in grey cast iron; table extension as standard, designed as a 335 mm x 625 mm lockable tool tray
Table Height: 900 mm
Sliding Table: 3000 mm (9'8") standard length; table length corresponds to cut length; infinitely locking design, wear-resistant tempered guides with self-cleaning design; replaceable table lip, anodized aluminum construction
Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 8 mm drive pins
Saw Blade Replacement: "ProLock" Quick change system
Saw Blades: Ø 250 - 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades
Tilting Range: 0° to + 46°
Cutting Height: max. 204 mm / 550 mm Ø saw blade / 0°, max. 135 mm / 550 mm Ø saw blade @ +45°
Blade Width (main saw): Blades with max. 6 mm cutting width at a tilt angle of 0° to +46°, Dado max. 20 mm cutting width at a tilt angle of 0° (for USA: 3/4")
Motor Power: 5.5 kW (7.5 HP), 3Ph. 230 or 480V - 60 Hz
Rotational Speed: 2800 / 4000 / 5000 U/minSimple, comfortable speed change from the operator position through an opening in the trunnion behind the main blade
Rip Capacity: 850 mm (33.5")
Cross-cut Fence: Anodized aluminum with 2-point support and two stop elements; micro-adjustment with magnifier for inner ball bearing; dimension display with scale; length compensation for angle cuts with electronic support; cut length 190 - 2020 mm, extendable up to 3310 mm
Cross-cut Table: Galvanized steel construction, mitre cuts by scale without adjusting the stop; integrated fix positions for 0°, 22.5°, 30° and 45° cuts; single-handed clamping at sliding table; support dimensions 1340 x 650 mm
Rip Fence: Electronically controlled motorized rip fence; dimensions specified and displayed in the controller. Unique design allows fence to be lowered below table level; sensor in rip fence automatically compensates for width changes when fence is utilized in a mitre application; anodized aluminum construction riding on four grooved ball bearings.
Dust Extraction: Parallelogram saw blade guard dust port 100 mm Ø, machine frame 120 mm Ø; minimum dust extraction capacity: 880cfm at 4500fpm (V).
Guard: Blade guard with 2 sets of blade covers, supplied with 1 flat cover set for 0° cuts and one flat / bulbous blade cover set for cuts from 0° to 46°; clearance between saw blade axis and support column: 900 mm; Clearance - when blade guard is pushed back - between blade and guard arm approx. 635 mm; Guard locks in place from working position.
Standard Accessories:
* 1 Clamping shoe on sliding table
* 1 ProLock Allen key
* 1 Reset grip
* 4 Riving knife (250/350, 350/450, 450/500, 500/550)
* 1 Push stick
* 1 AIGNER push block
Control Panel: Control panel at eye level, rotatable, tiltable, and capable of being swung away, incl. document holder
Electrical Equipment: Electronic soft start and braking device; contact control of dust extraction; motor protection switch and overload protection, undervoltage protection; lockable main switch (lock-out/tag-out), 2 EMERGENCY STOP buttons (control panel, frame); 3Ph. 230 or 480 V, 60 Hz. Compliant with UL/CSA regulations.