The MX340 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
Work-piece is fed by chain
Edge coil support plate: Ø 800 mm, for PVC/ABS
Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
Teflon-coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers
High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
Radius scraper with 2mm radius
3000 RPM top & bottom buffing units
Heavy duty pressure beam with extendable work-piece support
Heated infeed fence for pre-heating the panel for optimum glue penetration
Feeding speed 9 meters/min.
Panel thickness 8~45 mm
Edge thickness 0.4 ~ 3 mm
Min. panel width 100 mm
Min. panel length 210 mm
Working table height 850 mm
Dust collection outlet Ø 127 mm (5”)
Electrical consumption 5.5 KW
Electrical requirement 15 amps (Voltage must be +/- 5%)
Voltage 230/3/60
Machine weight 520 kgs
Machine dimensions 2950 x 1370 x 660 mm
- Pre Heat
- End Trimming
- T/B Trimming
- Radius Scrape
- Buffing
Work-piece is fed by chain
Edge coil support plate: Ø 800 mm, for PVC/ABS
Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
Teflon-coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers
High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
Radius scraper with 2mm radius
3000 RPM top & bottom buffing units
Heavy duty pressure beam with extendable work-piece support
Heated infeed fence for pre-heating the panel for optimum glue penetration
Feeding speed 9 meters/min.
Panel thickness 8~45 mm
Edge thickness 0.4 ~ 3 mm
Min. panel width 100 mm
Min. panel length 210 mm
Working table height 850 mm
Dust collection outlet Ø 127 mm (5”)
Electrical consumption 5.5 KW
Electrical requirement 15 amps (Voltage must be +/- 5%)
Voltage 230/3/60
Machine weight 520 kgs
Machine dimensions 2950 x 1370 x 660 mm