Cantek C-371 37" Wide Belt Sander
The Cantek C731 is better than any typical wide belt sanders out there. It has a 37 inch abrasive belt size for faster sanding. It guarantees proper belt placement because of the conveyor belt tracking feature. This machine also features a single combination head that you can fully control by simply using the integrated lever. A centralized control panel with digital motorized thickness adjustment, hour meter, ammeter and emergency stop button is also available. To set sanding speed for your workpieces, you can use the variable feed speed control feature of the Cantek C-371. When you sent through a material too thick for sanding, the overheight lever gate will prevent the machine from processing the stock by shutting it off.
- Features
- Head includes combination of diameter drum and widen platen
- Centralized control system with digital control for thickness adjustment
- A disk brake is included on the main motor
- Holds down materials with the double infeed and oufteed rolls
- Added safety with the emergency stop system and safety interlocks
- Hour meter and ammeter are fitted
- Excellent abrasive belt tracking via the electronic belt tracking feature
Abrasive belt size | 37 in x 60 in |
Main motor | 20 HP |
Feed motor | 2 HP |
Table rise/fall motor | 1/2 HP |
Max. width of stock | 36 in |
Min. part length | 13 in |
Max. thickness | 4 in (up to 8 in optional) |
Feed speed: variable | 13 to 52 FPM |
Passline height | 33 in to 38 in |
Infeed table length | 11 1/2 in |
Dust outlet | 1 @ 5 in (123mm) |
Compressed air usage | 2 CFM @ 90 PSI |