Our MRS-340M moving blade multi rip saws are designed to achieve maximum material yield with greatly reduced setup times. It is equipped with fixed blade(s) and one or two shifting saws. User friendly touch screen controller allows you to adjust the blades through stored programs or jogging them in to place by use of a joystick.
OUTSTANDING FEATURES:
Choice of two configurations: 1-shifting saw and 2-shifting saws
Heavy-duty steel main frame
Precision straight line feeding caterpillar chain is made from cast iron
High frequency hardened feed chain guide rails provide up to 3-times the life of an untreated rail. This ensures a more precise cut.
User friendly touch screen control on moveable pedestal for optimum operator convenience.
Fully programmable blade position (10 programs of 10 sets each) or infinitely variable through joystick control.
Saw blade positioning is accomplished by high precision ball screws coupled with industrial series servo motors and controls.
Shifting saw bushings are specially designed for high accuracy and fast saw positioning
(3)rows of anti-kickback fingers, 3 Top & 1 Bottom
Variable feed speeds of 16~135 FPM.
Laser light alignment system automatically adjusts to improve material yield and reduce defects.
Powered outfeed roll ensures that the material being cut leaves the machine completely.
Electronic centralized lubrication system provides lubrication to the chain track assembly for optimum wear resistance
Automatic star-delta starter (low amperage - soft start) and low voltage controls
SPECIFICATIONS:
Max. workpiece thickness (Moveable saw(s)) 4"(100mm) with 14" blade
2.95" (75mm) with 12" blade
Max. workpiece thickness (Fixed saw(s)) 4.33" (110mm) with 14" blade
3.34" (85mm) with 12" blade
Max. working width - between outside saws 13-3/4"
Max. material width 25.6" (650mm)
Feed speeds 15~135 FPM (5-40mpm), to 165FPM if desired.
AVAILABLE OPTIONS:
Hydraulic Quick Lack Arbor: Infinite quick positioning of saw blades on Arbor. Shaft as hardened inserts which expand and contact the internal bore of the blades. This provides accurate and secure blade holding with the tightening of a knob on the end of the shaft.
Pneumatic Pressure Rollers: Each top pressure roller is controlled by an individual air regulator for superior hold down and material control during cutting operations
Replaceable Chain Pads: Available with replaceable Urethane and/or Cast Iron chain pads to suit your needs
Quick Locking Mechanical Saw Collars: Mounted for fast accurate sure holding in any stationary position desired.
Infeed & Outfeed Automated Systems
OUTSTANDING FEATURES:
Choice of two configurations: 1-shifting saw and 2-shifting saws
Heavy-duty steel main frame
Precision straight line feeding caterpillar chain is made from cast iron
High frequency hardened feed chain guide rails provide up to 3-times the life of an untreated rail. This ensures a more precise cut.
User friendly touch screen control on moveable pedestal for optimum operator convenience.
Fully programmable blade position (10 programs of 10 sets each) or infinitely variable through joystick control.
Saw blade positioning is accomplished by high precision ball screws coupled with industrial series servo motors and controls.
Shifting saw bushings are specially designed for high accuracy and fast saw positioning
(3)rows of anti-kickback fingers, 3 Top & 1 Bottom
Variable feed speeds of 16~135 FPM.
Laser light alignment system automatically adjusts to improve material yield and reduce defects.
Powered outfeed roll ensures that the material being cut leaves the machine completely.
Electronic centralized lubrication system provides lubrication to the chain track assembly for optimum wear resistance
Automatic star-delta starter (low amperage - soft start) and low voltage controls
SPECIFICATIONS:
Max. workpiece thickness (Moveable saw(s)) 4"(100mm) with 14" blade
2.95" (75mm) with 12" blade
Max. workpiece thickness (Fixed saw(s)) 4.33" (110mm) with 14" blade
3.34" (85mm) with 12" blade
Max. working width - between outside saws 13-3/4"
Max. material width 25.6" (650mm)
Feed speeds 15~135 FPM (5-40mpm), to 165FPM if desired.
AVAILABLE OPTIONS:
Hydraulic Quick Lack Arbor: Infinite quick positioning of saw blades on Arbor. Shaft as hardened inserts which expand and contact the internal bore of the blades. This provides accurate and secure blade holding with the tightening of a knob on the end of the shaft.
Pneumatic Pressure Rollers: Each top pressure roller is controlled by an individual air regulator for superior hold down and material control during cutting operations
Replaceable Chain Pads: Available with replaceable Urethane and/or Cast Iron chain pads to suit your needs
Quick Locking Mechanical Saw Collars: Mounted for fast accurate sure holding in any stationary position desired.
Infeed & Outfeed Automated Systems