The Louver Groover machine is designed to rout stiles for fixed slat louver doors. It will also drill single holes for moveable shutters, both left hand and right hand stiles when required.
Features & Benefits:
- Small shop footprint
- Versatile hole routing
- Easy angle adjustments
- 0-90 degrees
- Hydraulic stile movement
- Stiles over 8 feet long
- Easy changeable bit diameter
- High RPM on router bits
- Allows for clean cut in hardwoods
- Large slot size & lengths
- Stiles from 3/4" to 4" thick
- Stiles from 1-1/2" to 5-1/8" wide
- Deep slot routs up to 1-3/16"
- 20 slots (40) per minute per pair
| Max. Length of Slot | 2" (50 mm) |
| Max. Depth of Slot | 1-3/16" (30 mm) |
| Max. Distance between Slots | 4" (100 mm) |
| Min Distance between Slots | 13/64" (5 mm) |
| Slot Tilting Angle | 0-90 degree |
| Max. Size of Work Piece | 4" x 5-1/8" (H X W) |
| Min Size of Work Piece | 25/64" x 1-3/16" (H x W) |
| Working Speed (each side) | 20 slots/min |
| Cutter Spindle Speed | 12000 rpm |
| Cutter Head Motor | 5 HP |
| Cutter Head Oscillating Motor | 1 HP |
| Work Material Movement | Air-Hydraulic |
| Machine Size (L x W X H) | 158" x 45" x 47" |
| Machine Weight | 2100 lbs |