Order By Phone Today


MON-THURS 7:30am-5pm EST
FRI 8am-3pm EST

Doucet J-3-H Multiple Spindle Vertical Boring Machine

Item #: J3H
Brand: Doucet
Model: J3H
Year Mfg:

Reg Price: $0.00

Our Price: $0.00


Additional product photos. Click to view larger.

The J-3-H features spindles mounted on a fixed upper carriage. A hydraulically actuated hardwood table moves material to be drilled up to the boring bits.

The table slides over 2 hard chrome-finished guideposts. Adjustable vertical stroke (up to eight inches) is controlled by limit switches for a consistent drilling depth. Material feed speed can be set by flow control valve. For added flexibility in the boring patterns, spindles and/or clusters are belt driven and powered by 1, 1.5 or 2 HP three phase motors 220, 440 or 600 volts / 60 cycles

Belt driven spindles and fixed center clusters, as well as hold downs, can be mounted at the end of individual arms. Spindle arms can be positioned in any direction, thus utilizing the total table surface. When holes to be bored present an in-line pattern, a dovetail mounting arrangement saves up to 60% on set-up time. Spindles can be moved to the exact position with the help of a scale fastened to the face of the dovetail beam. When boring is done on more than one axis, dovetail cross arms can be added to the main beam, permitting installation of spindles on those cross arms.

The J3H is available in 4, 5, 6, 8, 10 and 12 foot widths

The basic machine includes: main body, a 24" wide hardwood table of lengths specified above with a maximum vertical hydraulic travel of 8", hydraulic power unit, electrical control system, cycle foot switch and safety guard.

BORING AREA24” by table length
TABLE (laminated hardwood)24” wide X 48” long
OPERATIONSingle stroke | Up to 8” stroke (adjustable) | 3 HP hydraulic power unit | Variable speed feed
SPINDLE MOUNTDepending on drilling pattern and setup requirements, spindles can be mounted on individual cast iron arms, on a dovetail beam or into a machined aluminium template
SPINDLE(S)Quantity as required | 1 1⁄2” in diameter with spring collet for 1⁄2” shank | Speed 2300 RPM | Timing belt driven
MOTOR(S)Quantity as required (depends on the size of the machine) | 1 HP, 208/220/440/575 volts, 3 Ph., 60 cycles
GUARDClear plastic guard
DIMENSIONSheight 70”, width 48”, depth 50”
WEIGHTApproximate net weight: 2500 lbs. - approximate shipping weight: 2750 lbs.