The J-30 Vertical Boring Machine is equipped with a fixed wooden table. Its
vertical boring heads with spindles move down and up. Since it has a fixed table,
the machine can be equipped with an automatic feeding device.
As an option, the J-30 can be equipped with individual boring units mounted at
one end of the table. Vertical spindle and hold downs can be mounted on individual
arms or on a dovetail beam or a combination thereof. The boring depth
and feed speed of the spindle carriage are widely adjustable.
vertical boring heads with spindles move down and up. Since it has a fixed table,
the machine can be equipped with an automatic feeding device.
As an option, the J-30 can be equipped with individual boring units mounted at
one end of the table. Vertical spindle and hold downs can be mounted on individual
arms or on a dovetail beam or a combination thereof. The boring depth
and feed speed of the spindle carriage are widely adjustable.
MODEL J-30 SPECIFICATIONS | 4 FOOT MODEL |
TABLE (laminated hardwood) | 24” wide X 48” long |
BORING AREA | 24” by table length |
OPERATION | Single stroke | Up to 8” stroke (adjustable) | 3 HP hydraulic power unit | Variable speed feed |
SPINDLE MOUNT | Depending on drilling pattern and setup requirements, spindles can be mounted on individual cast iron arms, on a dovetail beam or into a machined aluminium template. |
SPINDLE(S) | Quantity as required | 1 1⁄2” in diameter with spring collet for 1⁄2” shank | Speed 2300 RPM | Timing belt driven |
MOTOR(S) | Quantity as required (depends on the size of the machine) | 1 HP, 208/220/440/575 volts, 3 Ph., 60 cycles |
GUARD | Clear plastic guard |
DIMENSIONS | height 72”, width 54”, depth 52” |
WEIGHT | approximate net weight: 3000 lbs. - approximate shipping weight: 3250 lbs. |