Order By Phone Today


MON-THURS 7:30am-5pm EST
FRI 8am-3pm EST

Fletcher FM450S Molding Sander

Item #: FM 450-S
Brand: Fletcher
Year Mfg:

Reg Price: $0.00

Our Price: $0.00


Additional product photos. Click to view larger.

The Fletcher FM 450-S Brush Sanding Machine with four heads for denibbing sanding behind a molding operation.

  • Roller Transport feed system with variable speed adjustment. Lateral guides are manually adjustable in width.  Upper pressure rollers for hold down of the moldings.
  • A total of 4 variable speed direct drive 2 HP and 1 HP motors equipped with Flex-Trim heads. Top units are 12” wide and run in opposite directions.  Top motors are also adjustable in height.
  • Side motors are adjustable in and out from the centerline of the conveyor. 
  • The top pressure system is a series of idle rollers, adjustable in height. 
  • Touch Screen controls for stopping,starting and adjusting the machine feed rate and station RPM.
  • Two variable speed 2HP motors power the Flex-Trim heads. One head will turn towards the infeed (second head) , the other away from the infeed (first head).  The heads are adjustable in height.
  • The Hub length is 300 mm on 1” shafts.
  • Working width - 12” 
  • Sanding material 120 and 150 grit. Support brushes are 5 mm shorter
  • The side heads are built on 120mm hubs, for a 5” working height.
  • The sanding disks are on 2 HP motors with 1” shafts, and are variable speed. 
  • Sanding materials grit is 150. Ceramic Materials.
  • The head will tilt 0% to +90°.  Additional movement in and out to better position the head.  The machine base is modified to accept the additional movements.