- 1 (one) (9KW) router head with variable speeds from 1000 - 24,000 RPM
- 6 (six) position fixed tool changer
The HSD Router Spindle is equipped with maintenance free ceramic bearings, is grease lubricated and air cooled for longer bearing life.
Router motor is powered by an electronic AC inverter drive sytem.
A fast and efficient dynamic spindle brake is incorporated on the spindle motor.
A fixed tool changer with 6-tool capacity, mounted on one end of the machine frame for fast and efficient tool change operations.
1 (one) 5+4 (X,Y) position vertical drill, independently selectable, is located next to the Router Spindle.
Y-axis: heavy duty welded steel box type machine construction (frame) with multiple interior reinforcements to increase machine strength and absorb vibration. Adjustable levelling pads for accurate machine setting are provided.
X-axis: massive, heavy duty welded steel box type gantry with multiple reinforcements to increase strength and absorb vibration.
Z-axis: the spindle carriage, specially designed for high strength and inherent vibration dampening characteristics.
Hardened and precision ground ball screws with anti backlash ball nuts are provided for movements of the Z axis.
The X and Y-axis movement is via an industrial grade WHM Germany, Helical induction hardened quality rack and pinion system with zero backlash characteristics.
THK linear guide, self-lubricated by cartridge, guaranteed up to 5000 working hours so to avoid oil leaking, which can contaminate the working environment and the parts.
Very easy and inexpensive to maintain.
State-of-the-art, closed loop, Delta digital servo motors 750W for X and Y axis and 400W for Z are utilized.
Shimpo, Japan, 80mm Diameter gear box, insures the most reliable and accurate movement of the gantry.
The vacuum table has four vacuum zones and is made of a welded torsion resistant steel construction, on to which an industrial grade, extra hard PVC/phenolic matrix table top mounted for secure positioning of the work pieces and holding fixtures.
Three automatic table pop-up pins located at X0, Y0 for referencing sheet stock.
The Router is equipped with a 10 HP BECKER vacuum pump with 200 cfm at 20 in hg max. This table and pump combination will allow a wide range of flexibility in holding large and small work pieces for safe parts processing.
A safety hood for the spindle working area is provided to inhibit the operator from entering this area during machine operation.
An efficient dust collection manifold is provided for the Router and Drill Heads
Y-Axis: 1570 mm
X-Axis: 3100 mm
Y-Axis: 1550 mm
X-Axis: 3080 mm
(4 vacuum zones)
Y-Axis: 1570 mm
X-Axis: 3100 mm
Z-Axis: 200 mm
Maximum Feed Rate
X-Axis: 40 m/min (132 ft. per min.)
Y-Axis: 40 m/min (132 ft. per min.)
Z-Axis: 18 m/min (59 ft. per min.)
Working Spindle Config
Total Number of Machining Spindles: 2 (1 router,1 drill block)
Router Spindle: 9KW Router spindle w/ 6 - position fixed tool changer
Spindle Type: HSD Grease lubrication w/ ceramic bearings and air cooling. Torque will vary dependent on spindle rotation below 9000 RPM.
Motor Power: 9 KW
Spindle Rotation: 1000-24,000 RPM (CW or CCW)
No. of tools changeable: 6
Tool Holder System: HSK-F63
No of Tool Holders: 3 sets
Drill Head: HSD/FAM Independent Drill Spindle
No. Vertical Drills: 5+4
Drill Shank: 10 mm diameter
System: 32 mm on centre
- Spindle coverage area of machining table: router spindle has full coverage
- Drill spindle 100% of table area
Vane Type Industrial Pump
Becker-Germany (Capacity: 250 cbm/hour) 10 HP
220 V 60 Hz 3 Ph
Compressed Air: 220 Litre/Min = 85 lb/inch
Dust: Outlet 6" (150mm) at 2965 m3/hr = 1745 CFM
Controller: OSAI PC